摘要
为了验证A2O-MBBR工艺在某城市污水厂提标改造应用的可行性,采用规模为1 m3/h的A2O-MBBR中试装置进行了模拟试验研究。试验结果表明,中试装置出水CODCr、NH3-N、TN和TP平均质量浓度可分别达到37、0.61、10、0.55 mg/L,基本满足GB 18918—2002《城镇污水处理厂污染物排放标准》一级A排放标准的要求,采用A2O-MBBR工艺用于城市污水厂提标改造是可行的。
In order to verify the feasibility of the application of A^2/O-MBBR process for upgrading and re-construction of an urban wastewater treatment plant, a 1 m3/h pilot scale test on the stimulant wastewater treat-ment by A^2/O-MBBR process was investigated. The results of the test showed that, the average mass concentra-tions of CODCr, NH3-N, TN and TP in the effluent from the device reached 37, 0.61, 10, and 0.55 mg/L respec-tively, which could basically meet the specification of grade A class 1 in GB 18918-2002 Discharge Standard of Pollutants for Municipal Wastewater Treatment Plant. It could draw a conclusion that, using A^2O-MBBR process to upgrade and reconstruct urban wastewater treatment plant was feasible.
出处
《工业用水与废水》
CAS
2015年第3期15-18,共4页
Industrial Water & Wastewater
基金
国家863计划项目(2012AA063406)
2014年江苏省"双创博士"项目(苏人才办[2014]27号)
关键词
MBBR
A^2O工艺
升级改造
城市污水厂
MBBR
MBBR
A^2O process
upgrading and reconstruction
urban wastewater treatment plant