期刊文献+

Influence of Vanadium Content on Bainitic Transformation of a Low-Carbon Boron Steel During Continuous Cooling 被引量:4

Influence of Vanadium Content on Bainitic Transformation of a Low-Carbon Boron Steel During Continuous Cooling
原文传递
导出
摘要 The phase transformation behaviors during continuous cooling of low-carbon boron steels with different vanadium contents were studied by means of dilatometric measurement and microstructure observation. The bainite transformation behavior is not noticeably altered when the vanadium content is 0.042 and 0.086 wt%, and these steels exhibit full bainitic microstructure even at a cooling rate of 5 ℃/s. When vanadium content is increased to 0.18 wt%, ferrite is still present in the microstructure even at a cooling rate of 40 ℃/s. Vickers hardness of the steels with 0.042 and 0.086 wt% V is remarkably higher than that of the steel with 0.18 wt% V at a cooling rate higher than 10 ℃/s, and the difference is increased with the increase in cooling rate. Moreover, the amount of coarse vanadium precipitates formed in austenite is increased with the increase in vanadium content. The optimum content of vanadium to obtain bainitic microstructure is 0.086 wt% in this experimental low-carbon boron steels. The phase transformation behaviors during continuous cooling of low-carbon boron steels with different vanadium contents were studied by means of dilatometric measurement and microstructure observation. The bainite transformation behavior is not noticeably altered when the vanadium content is 0.042 and 0.086 wt%, and these steels exhibit full bainitic microstructure even at a cooling rate of 5 ℃/s. When vanadium content is increased to 0.18 wt%, ferrite is still present in the microstructure even at a cooling rate of 40 ℃/s. Vickers hardness of the steels with 0.042 and 0.086 wt% V is remarkably higher than that of the steel with 0.18 wt% V at a cooling rate higher than 10 ℃/s, and the difference is increased with the increase in cooling rate. Moreover, the amount of coarse vanadium precipitates formed in austenite is increased with the increase in vanadium content. The optimum content of vanadium to obtain bainitic microstructure is 0.086 wt% in this experimental low-carbon boron steels.
出处 《Acta Metallurgica Sinica(English Letters)》 SCIE EI CAS CSCD 2015年第6期692-698,共7页 金属学报(英文版)
基金 financially supported by the National Key Technology Research and Development Program of the Ministry of Science and Technology of China (No. 2011BAE13B03) the Natural Science Foundation of Liaoning Province of China (No. 201202062)
关键词 Microalloyed steel VANADIUM Bainitic transformation BORON MICROSTRUCTURE Microalloyed steel Vanadium Bainitic transformation Boron Microstructure
  • 相关文献

参考文献24

  • 1L.Y. Lan, CL. Qiu, P Zhou, D.W. Zhao, C.M. Li, Acta Metall. Sin. (Engl. Leu.) 24, 473 (2011).
  • 2H.F. Lan, L.X. Du, R.D.K. Misra, Mater. Sci. Eng. A 611, 194 (2014).
  • 3J.R. Yang, C.Y. Huang, S.C. Wang, Mater. Des. 13,335 (1992).
  • 4C. Feng, H.S. Fang, Y.K. Zheng, B.Z. Bai, J. Iron Steel Res. Int. 17(4), 53 (2010).
  • 5X.W. Kong, L.Y. Lan, Z.Y. Hu, B. Li, T.Z. Sui, J. Mater. Pro?cess. Technol. 217, 202 (2015).
  • 6S.H. Mousavi Anijdana, A. Rezaeian, S. Yue, Mater. Charact. 63, 27 (2012).
  • 7J. Calvo, l.H. Jung, A.M. Elwazri, D. Bai, S. Yue, Mater. Sci. Eng. A 520, 90 (2009).
  • 8H. Wu, C. Liu, Z. Zhao, Y. Zhao, S.Z. Zhu, v.x. Liu, S. Bhole, Mater. Des. 27, 651 (2006).
  • 9S. Yoshida, K. Ushioda, J. Agren, ISIJ Int. 54, 685 (2014).
  • 10H. Yang, x.x. Wang, J.B. Qu, J. Iron Steel Res. Int. 21, 787 (2014).

同被引文献37

引证文献4

二级引证文献11

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部