多功能单组分高填充间隙厌氧胶

Multifunctional one-component anaerobic adhesive suitable for larger gap fill

简介了发明专利CN102516891(2012)中采用特定的单体以及促进剂搭配可以实现厌氧胶高填充间隙的方法。该胶室温条件下,呈液态或者膏状,初固时间10 min左右,填充间隙可达7.2 mm,贮存稳定性优异(℃/80 2 h不凝胶),常温下在深色的聚乙烯塑料瓶(管)中可以保存2年以上。

This article is the introduction of author＆#39;s patent CN102516891（2012）, this patent relates to the method of using specific combination of the monomers and accelerators to prepare the anaerobic adhesive suitable for larger gap fill. At room temperature, this anaerobic adhesive is liquid or paste, the fixing time is about 10 min, it can fill the gap up to 7.2 nm, the storage stability （80℃×2 h not gel） is excellent and it can stored for over two years at room temperature in the dark polyethylene plastic bottles（tubes）.