期刊文献+

Styrene/Butadiene Copolymer Synthesized by Reactive Extrusion 被引量:1

Styrene/Butadiene Copolymer Synthesized by Reactive Extrusion
原文传递
导出
摘要 In this study, we present a method to synthesize styrene-butadiene copolymer, using anionic polymerization in a co-rotating closely intermeshing twin-screw extruder. The weight content of polybutadiene in these copolymers was above 50% although in the past studies it had been possible to accomplish levels higher than 30%. ^1H-NMR and GPC show that the molecular structure of the two polymers is different due to different feeding method. In terms of the structure of the polymerized products, the mechanism of polymerization in the bulk polymerization is discussed. TEM and DMA show that two phases in the block copolymer are completely incompatible, leading to sharp phase separation, while the case is complicated in the copolymer through the mixture feeding. Traditionally, styrene-butadiene rubber is mainly synthesized by solution polymerization. Reactive extrusion in this paper provides a possibility to synthesize these products in an environmentally friendly way. In this study, we present a method to synthesize styrene-butadiene copolymer, using anionic polymerization in a co-rotating closely intermeshing twin-screw extruder. The weight content of polybutadiene in these copolymers was above 50% although in the past studies it had been possible to accomplish levels higher than 30%. ^1H-NMR and GPC show that the molecular structure of the two polymers is different due to different feeding method. In terms of the structure of the polymerized products, the mechanism of polymerization in the bulk polymerization is discussed. TEM and DMA show that two phases in the block copolymer are completely incompatible, leading to sharp phase separation, while the case is complicated in the copolymer through the mixture feeding. Traditionally, styrene-butadiene rubber is mainly synthesized by solution polymerization. Reactive extrusion in this paper provides a possibility to synthesize these products in an environmentally friendly way.
出处 《Chinese Journal of Polymer Science》 SCIE CAS CSCD 2015年第8期1096-1103,共8页 高分子科学(英文版)
基金 financially supported by the National Natural Science Foundation of China for the Major Program(No.50933002) the National High Technology Research and Development Program of China(863 Program,No.2012AA040306) Shanghai Leading Academic Discipline Project(No.B502)
关键词 Reactive extrusion STYRENE BUTADIENE Anionic polymerization. Reactive extrusion Styrene Butadiene Anionic polymerization.
  • 相关文献

参考文献25

  • 1Stuber, N.P. and Tirrell, M., Polym. Process Eng., 1985, 3:71.
  • 2Michaeli, W., Frings, W., H6cker, H. and Berghaus, U., J. Appl. Polym. Sci., 1993, 48:871.
  • 3Michaeli, M., Grefenstein, A. and Frings, W., Adv. Polym. Technol., 1993, 12(1): 25.
  • 4Zhang, Y., Yan, W., Gao, S., Zheng, A. and Han, Z., Acta Polymerica Sinica (in Chinese), 2002, (5): 677.
  • 5Si, L., Zheng, A., Zhu, Z. and Zhang, Y., J. Appl. Polym. Sci., 2002, 85(10): 2130.
  • 6Sun, G., Zhou, Y., Zhang, K., Liu, C. and Zheng, A., Acta Polymerica Sinica (in Chinese), 2007, (9): 790.
  • 7Zhang, K., Zhou, Y., Sun, G., Hu, F. and Zheng, A., Polym. Mater. Sci. &Eng. (in Chinese), 2009, 3:42.
  • 8Gao, S., Zhang, Y., Zheng, A. and Xiao, H., Polym. Adv. Technol., 2004, 15:185.
  • 9Gao, S., Zhang, Y., Zheng, A. and Xiao, H., J. Appl, Polym. Sci., 2004, 91:2265.
  • 10Yuan, X., Guan, Y., Li, S. and Zheng, A., J. Appl. Polym. Sci., 2014, 15(2): 131.

同被引文献3

引证文献1

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部