期刊文献+

双层分流燃烧室与喷射参数匹配的试验研究 被引量:2

An Experimental Study on the Matching Between Fuel Injection Parameters and Spray-bifurcation Combustion Chamber
下载PDF
导出
摘要 为进一步改善采用双层分流燃烧室的直喷式柴油机的燃烧性能,在单缸柴油机台架上对不同喷油压力、喷油提前角和喷嘴伸出长度等喷射参数与双层分流燃烧室的匹配进行了试验研究。结果表明,通过喷射参数与双层分流燃烧室的合理匹配可有效地改善柴油机的燃油经济性和排放性能。 In order to further improve the combustion performance of direct injection diesel engine with spray-bifurcation combustion chamber, an experimental study is conducted on the matching between injection pa- rameters ( the pressures and advanced angles of fuel injection and nozzle tip protrusions etc. ) and spray-bifurcation combustion chamber. The results show that proper matching between injection parameters and spray-bifurcation combustion chamber can effectively improve the fuel economy and emission performance of diesel engine.
出处 《汽车工程》 EI CSCD 北大核心 2015年第5期501-505,共5页 Automotive Engineering
基金 国家自然科学基金(51076024)资助
关键词 直喷式柴油机 双层分流燃烧室 喷射参数 数值模拟 DI diesel engine spray-bifurcation combustion chamber fuel injection parameters numerical simulation
  • 相关文献

参考文献16

  • 1Jovanovic Z S, Petrovic S V, Tomic M V. The Effect of Combus- tion Chamber Geometry Layout on Combustion and Emission [ J ]. Thermal Science ,2008,12:7-24.
  • 2Adrian C S, Sorin H. Influence of Geometry on the Position and the Intensity of Maximum Kinetic Energy in a Combustion Chamber [ J]. Diffusion in Solids and Liquids,2011,312-315:725-730.
  • 3Takashi K, Kusaka J. Improvement of Combustion and Exhaust Gas Emissions in a Passenger Car Diesel Engine by Modification of Combustion Chamber Design[C]. SAE Paper 2006-01-3435.
  • 4Wickman D D, Senecal P K, Reitz R D. Diesel Engine Combus- tion Chamber Geometry Optimization Using Genetic Algorithms and Multi-dimensional Spray and Combustion Modeling [ C ]. SAE Pa- per 2001-01-0547.
  • 5Montair R, Tsunemoto H, Ishitan H. Fuel Spray Behavior in a Small DI Diesel Engine : Effect of Combustion Chamber Geometry [ C ]. SAE Paoer 2000-01-0946.
  • 6王锡斌,马志豪,蒋德明.燃烧室几何形状对缸内气体流动和发动机性能的影响[J].内燃机工程,2002,23(2):6-11. 被引量:27
  • 7周磊,赵长禄,张付军,葛蕴珊.利用燃烧模拟对柴油机燃烧室的优化设计[J].燃烧科学与技术,2004,10(5):465-470. 被引量:24
  • 8Jaichandar S, Annamalai K. Influences of Re-entrant Combustion Chamber Geometry on the Performance of Pongamia Biodiesel in a DI Diesel Engine[J]. Energy,2012,1(44) :633-640.
  • 9Zhang C C, Wang Q, He Z X, et al. Simulation Research on Matching of Spray and Combustion Chamber Geometry in Diesel Engine [ J ]. Advanced Materials Research, 2010,199-200 : 193 - 197.
  • 10Park S W. Optimization of Combustion Chamber Geometry for Stoi- chiometric Diesel Combustion Using a Micro Genetic Algorithm [J]. Fuel Processing Technology,2010,91:1742-1752.

二级参考文献46

共引文献69

同被引文献11

引证文献2

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部