摘要
以汽油为萃取剂,采用三相物理萃取法处理含油污泥,考察了溶剂比、萃取温度、搅拌强度及搅拌时间对萃取率的影响。结果表明,5 g含油污泥在萃取温度35℃,加入0.09 g[由Al2(SO4)3和壳聚糖复配]絮凝剂,加入萃取剂体积2倍的采油废水,搅拌强度120 r/min,搅拌时间20 min,汽油加入量为2 m L/g油泥时,萃取率可达97.3%。
The deoiling treatment of oil sludge used gasoline as the solvent by the triphase extraction method. The experiment analyzed the four treatment conditions: liquid-solid ratio,treatment temperature,stirring intensity,treatment time,respectively in order to obtain the optimal extraction ratio. The result shows that when adding 5 g oil sludge and 0. 09 g flocculant consists of same amount chitosan and Al2( SO4)3,adding oilfield wastewater volume is about 2 times to the extraction solvent,the liquid-solid ratio is2 m L/g,treatment temperature is 35 ℃,mechanical stirring method,stirring intensity is 120 r/min,treatment time is 20 min,the final extraction ratio is 97. 3%.
出处
《应用化工》
CAS
CSCD
北大核心
2015年第6期1061-1063,共3页
Applied Chemical Industry
基金
陕西省科技计划项目(2012KTCQ01-22)
关键词
含油污泥
三相物理萃取法
工艺条件
萃取率
oily sludge
triphase extraction method
treatment conditions
extraction ratio