期刊文献+

Acidic Montmorillonite/Cordierite Monolithic Catalysts for Cleavage of Cumene Hydroperoxide 被引量:5

酸性蒙脱土/堇青石整体式催化剂用于过氧化氢异丙苯裂解(英文)
下载PDF
导出
摘要 In this work,a series of acidic montmorillonite/cordierite monolithic catalysts were prepared by a coating method using silica sol as the binder.The morphology and structure of the acidic montmorillonite/cordierite samples were characterized by means of X-ray diffraction(XRD),N_2 adsorption/desorption isotherms,and scanning electron microscope(SEM).The cleavage of cumene hydroperoxide(CHP) in a conventional fixed-bed reactor was chosen as a model reaction to evaluate the catalytic activity of the monolithic catalysts.The influences of acidic montmorillonite loading,reaction temperature.CHP concentration,and weight hourly space velocity(WHSV) on the catalytic activity and selectivity of phenol were studied.The results indicated that the obtained acidic montmorillonite/cordierite monolithic catalysts were firm and compact,and the loading of acidic montmorillonite was found to reach 40%(by mass) after three coating operations.The surface area of acidic montmorillonite/cordierite catalysts increases greatly as acidic montmorillonite loading increases due to higher surface area of acidic montmorillonite.Under the optimal reaction conditions(acidic montmorillonite loading of 32.5%(by mass),temperature of 80 ℃,a mass ratio of CHP to acetone of 1:3,and WHSV of CHP of 90 h^(-1)),the conversion of CHP can reach 100%,and the selectivity of phenol is up to 99.8%. In this work, a series of acidic montmorillonite/cordierite monolithic catalysts were prepared by a coating method using silica sol as the binder. The morphology and structure of the acidic montmorillonite/cordierite samples were characterized by means of X-ray diffraction (XRD), N2 adsorption/desorption isotherms, and scanning electron microscope (SEM). The cleavage of cumene hydroperoxide (CHP) in a conventional fixed-bed reactor was chosen as a model reaction to evaluate the catalytic activity of the monolithic catalysts. The influences of acidic montmorillonite loading, reaction temperature, CHP concentration, and weight hourly space velocity (WHSV) on the catalytic activity and selectivity of phenol were studied. The results indicated that the obtained acidic montmorillonite/cordierite monolithic catalysts were firm and compact, and the loading of acidic montmorillonite was found to reach 40% (by mass) after three coating operations. The surface area of acidic montmorillonite/cordierite catalysts increases greatly as acidic montmorillonite loading increases due to higher surface area of acidic montmorillonite. Under the optimal reaction conditions (acidic montmorillonite loading of 32.5% (by mass), temperature of 80 ℃, a mass ratio of CHP to acetone of 1: 3, and WHSV of CHP of 90 h- 1), the conversion of CHP can reach 100%, and the selectivity of phenol is up to 99.8%.
出处 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2014年第8期854-860,共7页 中国化学工程学报(英文版)
基金 Supported by the National Natural Science Foundation of China(21121064,21076008,21206008) the Projects in the National Science&Technology Pillar Program during the 12th Five-Year Plan Period(2011BAC06B04) the Research Fund for the Doctoral Program of Higher Education of China(20120010110002)
关键词 Monolithic catalyst Acidic montmorillonite Cumene hydroperoxide CLEAVAGE 整体式催化剂 过氧化氢异丙苯 蒙脱土 堇青石 酸性 裂解 固定床反应器 扫描电子显微镜
  • 相关文献

参考文献6

二级参考文献80

  • 1付会娟,金月昶,康久常.蜂窝陶瓷载体上氧化铝涂层的制备[J].当代化工,2006,35(5):289-292. 被引量:10
  • 2金凌云,何迈,鲁继青,贾爱平,苏孝文,罗孟飞.Y_2O_3涂层负载Pd整体式催化剂的制备和催化性能[J].催化学报,2007,28(7):635-640. 被引量:15
  • 3Blachou V,Goula D,Philippopoulos C.Wet milling of alumina and preparation of slurries for monolithic structure impregnation[J].Ind Eng Chem Res,1992,31:364-369.
  • 4Murrell L L.Sols and mixtures of sols as precursors of unique oxides[J].Catalysis Today,1997,35:225-245.
  • 5Agrafiotis C,Tsetsekou A.The effect of processing parameters on the properties of γ-alumina washcoats deposited on ceramic honeycombs[J].Journal of materials science,2000,35:951-960.
  • 6Jiang P,Lu G,Guo Y,et al.Preparation and properties of a γ-Al2O3 washcoat deposited on a ceramic honeycomb[J].Surface and Coatings Technology,2005,190:314-320.
  • 7Meille V,Pallier S,Rodriguez P.Reproducibility in the preparation of alumina slurries for washcoat application-role of temperature and particle size distribution[J].Colloids and surfaces A:Physicochemical and Engineering Aspects,2009,336:104-109.).
  • 8[1]Cybulski A, Moulijn J A. Structure Catalysts and Reactors. New York: Marcel Dekker, 1998, 15~284
  • 9[3]Groppi G, Tronconi E. Simulation of Structure Catalytic Reactor with Enhanced Thermal Conductivity for Selective Oxidation Reaction. Catalysis Today, 2001, 69(1) :63~73
  • 10[4]Crezee E, Barendregt A, Kapteijn F, et al. Carbon Coated Monolithic Catalysts in Selective Oxidation of Cyclohexanone. Catalysis Today, 2001, 69(3):283~290

共引文献83

同被引文献37

引证文献5

二级引证文献21

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部