广东某工厂含氟废水处理工程设计

Wastewater Treatment Engineering Design for Removing Fluorine from Water in A Factory in Guangdong Province

广东某工业生产车间废水含氟浓度较高,设计中采用设计采用三级物化处理,将氟离子浓度处理至排放标准后与综合废水混后排放。该工艺对COD、SS、F-和TP的去除率分别达到25%、70%、99.6%和98.3%。该工艺抗冲击负荷强,对含氟废水处理效果较好。

Workshop wastewater from a industrial production has containing a high level fluorine. Design is adopted three stage physicochemical treatment. The fluoride ion concentration to emission standard after the treatment and comprehensive wastewater discharged into river. After the process, the removal rates of COD, SS, F-and TP reached 25 %, 70 %, 99.6 % and 98.3 % respectively. The wastewater treatment process had strong resistance to impact load, and the treatment effect for containing fluorine wastewater is good.