摘要
In order to establish the design method for T-shaped tensile connector with high strength bolt,the theoretical analysis is carried out. Firstly,it analyzes the performance of the connector and establishes prying force calculation model. Based on the model,prying force equation and function between bolt prying force and flange thickness is derived,and the min and max thickness requirement of flange plate under a certain tension load is then obtained. Finally,two simplified design methods of the connector are proposed,which are bolt pulling capacity method and flange plate bending capacity method.
In order to establish the design method for T-shaped tensile connector with high strength bolt, the theoretical analysis is carried out. Firstly, it analyzes the performance of the connector and establishes prying force calculation model. Based on the model, prying force equation and function between bolt prying force and flange thickness is derived, and the min and max thickness requirement of flange plate under a certain tension load is then obtained. Finally, two simplified design methods of the connector are proposed, which are bolt pulling capacity method and flange plate bending capacity method.
基金
Sponsored by the National Natural Science Foundation of China(Grant No.51408620)
the Major Science and Technology Project during the Third Five-Year Plan Period of China MCC(Grant No.0012013010)