竹炭含量对PA66/竹炭混合改性材料光热物性影响

Influence of Light and Thermal Properties of Charcoal Content on PA66/Charcoal Mixed Modified Materials

通过对不同竹炭含量的PA66/竹炭混合改性材料的紫外-可见光Abs吸光度、DSC/TG热分析实验及傅里叶红外吸收光谱分析发现：加入微米级的竹炭微粉可使PA66/竹炭混合材料对紫外线的防护能级明显增强，竹炭含量为1%~5%时即可达到完全防护；混合改性材料的热稳定性降低；根据在波数1125 cm-1处吸收峰的强度大小，可定性地鉴别混合物中加入竹碳粉的量。

Based on the study of the key performance of micron charcoal powder, through the different levels of charcoal in PA66 / charcoal mixed modified materials＆#39; UV-visible absorbance Abs, DSC / TG thermal analysis experi-ments and fourier transform infrared absorption spectroscopy, it is found that adding micron charcoal powder can enhance UV protection level of PA66 / charcoal powder mixed materials significantly, and full protection level can be achieved when its content is 1% to 5% of charcoal;mixed modified thermal stability is decreased. According to the wave number 1125 cm-1 absorption peak,it can qualitative identify the quality of carbon powder, the methods and results can provide a reference for similar studies.