期刊文献+

ADC14铸锭微观组织不均匀行为的研究 被引量:1

Study on the Microstructure Inhomogeneous of ADC14 Ingot
下载PDF
导出
摘要 通过化学成分分析、金相组织分析等方法对某公司ADC14铸锭微观组织形貌、分布和均匀度进行了对比研究。结果表明:微观组织分布不均,存在粗大块状初晶硅和孔洞,截面呈空洞区、气缩孔区和针状微孔区明显分层。另外,试样中杂质元素含量较高,有一定的遗传性,这也是微观组织不均匀的本质原因。 The morphology degree of homogeneity and distribution of ADC14 microstructure were studied by chemical composition analysis and metallographic examination.The results showed that the microstructure was inhomogeneously distributed,the primary silicon and pores existed.Blowholes,shrinkage-blowholes and macro-shrinkage-porosity presented in the microstructure section.The high impurities content was the cause of the inhomogeneous microstructure due to the heredity.
机构地区 广东白云学院
出处 《铸造设备与工艺》 2015年第3期38-40,共3页 Foundry Equipment & Technology
关键词 ADC14铸锭 微观组织不均匀 组织分层 ADC14 ingot inhomogeneous microstructure layered microstructure
  • 相关文献

参考文献8

  • 1Campbell J. Castings[ M ]. 2nd Edition .Oxford:Butterworth-Heine-mann, 2003:139.
  • 2Xu C L, Jiang Q C. Effect of Nd on primary silicon and eutectic sil- icon in hypereutectic A1-Si alloy [J]. Alloys and compounds, 2006, 422: L1-L4.
  • 3WANG Shou-ren, MA Rul. Growth mechanism of primary silicon in cast hypoeutectic A1-Si alloys [J ]. Transactions of nonferrous metals society of china, 2012, 224:1264-1269.
  • 4Feng H K, Yu S R. Effect of uhrasonic treatment on microstructures of hypereutectic AI-Si alloy [ J ]. materials processing technology, 2008, 208:330-335.
  • 5陈振明,赵海东,陈学文,任川东,罗浩,林国醒.ADC14挤压铸造件中Si偏析的原因分析[J].特种铸造及有色合金,2013,33(8):743-746. 被引量:8
  • 6熊仪.压铸有色合金的应用现状和发展[J].特种铸造及有色合金,2000,20(z1):14-18. 被引量:13
  • 7Xu C L, Jiang Q C. Morphologies of primary silicon in hypereuttic AI-Si alloys with melt overheating temperature and cooling rate [J]. Materials science and engineering A, 2006, 437: 451-455.
  • 8李双寿,朱跃峰,曾大本,吴群虎,李庆荣,顾开广.原料组织遗传性及其在铸造铝合金中的应用[J].铸造,1999,48(8):53-54. 被引量:18

二级参考文献26

共引文献35

同被引文献11

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部