期刊文献+

基于AD500-9激光测距系统的设计 被引量:5

Design of Laser Ranging System Based on AD500-9
下载PDF
导出
摘要 基于AD500-9型雪崩光电二极管设计以窄脉冲发射、雪崩光电二极管偏置、弱光信号处理和计时电路为主要结构的激光测距系统.利用标准时基发生器对计时电路进行验证,采用线性拟合方法使时间测量的精度为10-10量级.采用软件校准方法将测距实验中的测量误差控制在±0.1m以内,并对误差进行分析. Laser ranging system was designed based on AD500-9.The system is composed of four parts:narrow pulse laser emission circuit,APD bias circuit,weak photo-electricity signal processing circuit,and time measurement circuit.The timing circuit was tested and verified with self-designed standard timing generator.It has realized 10-10 level time measurement via linear fitting.The analysis shows the distance measurement error is limited to ±0.1 m in outdoor ranging experiment by software calibration method.
出处 《吉林大学学报(理学版)》 CAS CSCD 北大核心 2015年第4期773-778,共6页 Journal of Jilin University:Science Edition
基金 国家自然科学基金(批准号:61177076)
关键词 雪崩光电二极管 偏置电路 激光测距 微弱光电信号处理 avalanche photo diode(APD) bias circuit laser ranging weak photo-electricity signal processing
  • 相关文献

参考文献10

二级参考文献41

共引文献108

同被引文献37

引证文献5

二级引证文献37

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部