摘要
研究介绍了一种偏向辐射的介质谐振器天线设计方法。基于探针馈电圆柱形介质谐振器天线,在偏离馈电一侧对介质谐振器进行穿孔,并进行金属孔化。通过分析优化穿孔的大小与位置,实现了圆柱形介质谐振器天线的偏向辐射。仿真与实验吻合较好,结果表明:天线的10 d B相对阻抗带宽为7%,覆盖频率范围6.3-6.7 GHz,在阻抗带宽内,偏向辐射角度稳定在36°-37°,天线增益为6.0-7.2 d Bi。
dielectric resonator antenna( DRA) design method with an inclined radiation is introduced.Based on the structure of the cylindrical resonator dielectric antenna fed by a probe,a hole is punched to the dielectric resonator antenna on the side away from the feed point and metallized. By analyzing and optimizing the size and position of the hole,the inclined radiation of the cylindrical DRA is achieved. Simulated and measured results have a good agreement. The results show that the 10 d B relative impedance bandwidth is 7%,covering the frequency of 6. 3 ~6. 7 GHz. The inclined radiation angle is stable from36° to 37°and the gain is 6. 0 ~7. 2 d Bi.
出处
《中国电子科学研究院学报》
北大核心
2015年第3期265-268,共4页
Journal of China Academy of Electronics and Information Technology
基金
国家自然科学基金(61201058
61471240)
上海市教育委员会科研创新项目(12Z112030001)
教育部留学回国人员科研启动基金
SMC-晨星优秀青年教师计划
教育部国防重点实验室主任基金
关键词
介质谐振器天线
偏向辐射
穿孔
dielectric resonator antenna
inclined radiation
perforation