摘要
旋钮为一小型产品,大批量生产,故可采用一模6腔平衡式的型腔布局。在利用UG进行模具设计时,先设计单腔模,然后根据型腔布局,利用复制镜像及求和命令完成一多腔模的设计。
Knob produced in bulk for a small product was used by the layout of 6 chambers in cavity. Single cavity mold was designed in first with UG, then according to the cavity layout design, multi cavity mold was completed by copy and mirror command.
出处
《价值工程》
2015年第23期129-130,共2页
Value Engineering
关键词
旋钮
UG
一模多腔
knob
UG
multi cavity mold