摘要
为了提高木质素产品的附加值,以木质素季铵盐为改性剂、钠基膨润土为原料,制备了不同季铵盐载量的膨润土。通过FTIR表征改性膨润土结构,并采用XRD分析其底面间距。以啶虫脒为药物释放的对象、改性膨润土作为释放的主要载体,利用浸渍吸附的方法制备出了啶虫脒缓释剂,并研究其缓释性能。结果表明:啶虫脒在改性膨润土上的吸附量随着木质素季铵盐载量的增加而先增大后减少。当木质素季铵盐载量相当于膨润土阳离子交换容量(CEC)的0.8倍时制备的改性膨润土(L-0.8Bt)对啶虫脒的吸附效果最佳,最大吸附量为315 mg/g。制备啶虫脒缓释剂的最佳工艺条件为L-0.8Bt用量0.02 g、吸附时间4 h、啶虫脒质量浓度500 mg/L、p H值6。药水比例和温度对载药L-0.8Bt的缓释快慢有一定影响。
In order to increase the added value of lignin products,bentonites with different loading dosages of lignin quaternary ammonium salt( LQAS) were synthesized with sodium-based bentonite as the raw material and LQAS as the modification agent. The morphological structure of bentonite was modified by FTIR,and the basal spacing of modified bentonite was analyzed with XRD. Acetaniprid was selected as the research object for release,and the modified bentonite as main carrier for the release. Acetaniprid slow-release formulation was prepared by means of leaching and adsorption,and its performance was studied. The results showed that with the increase of LQAS dosage,the adsorption capacity of acetaniprid in modified bentonite first increased and then decreased. The adsorption effect of modified bentonite( L-0. 8Bt) was optimum with the maximum adsorption capacity of 315 mg / g when L-0. 8Bt prepared with dosage of LQAS was 0. 8 times cation exchange capacity( CEC) in bentonite. The optimal preparation conditions for the acetaniprid slow-release formulation were: L-0. 8Bt dosage 0. 02 g,adsorption time 4 h,mass concentration of acetaniprid 500 mg / L and p H 6. The potion proportion and temperature had certain effect on the slow-release speed of acetaniprid-loaded L-0. 8Bt.
出处
《北京林业大学学报》
CAS
CSCD
北大核心
2015年第5期140-146,共7页
Journal of Beijing Forestry University
基金
"十二五"国家科技支撑计划项目(2012BAD24B0403)
关键词
木质素季铵盐
膨润土
吸附
啶虫脒
缓释
lignin quaternary ammonium salt
bentonite
adsorption
acetaniprid
slow-release