期刊文献+

Verification of Interpretation of Dynamic Strain Aging for Intermediate Temperature Embrittlement in Ni-Bi Alloy

Verification of Interpretation of Dynamic Strain Aging for Intermediate Temperature Embrittlement in Ni-Bi Alloy
原文传递
导出
摘要 Intermediate temperature embritttement (ITE) is a general phenomenon in Ni alloys and recently was interpreted by dynamic strain aging (DSA). The relationship between ITE and DSA was studied by a binary Ni-Bi alloy. The experimental alloy of well-controlled purity was produced by vacuum induction inching and then heat-treated properly. Tensile tests were performed at various tensile temperatures, and the elongation at fracture was used to indicate the ductility. In order to identify the mechanisms of fracture and ITE, fracture morphologies of the samples of low ductility were observed by scanning electron microscopy. According to the tensile ductility, Ni-Bi alloy shows an obvious embrittlement behavior in the intermediate temperature range (700--750℃ ). However, the stress strain curves of Ni-Bi alloy and the fracture morphologies indicate that DSA does not exist over the whole temperature range. Based on the experimental results and literatures, the interpretation of DSA was then discussed and proved to be invalid for elucidating the general feature of ITE in Ni-Bi alloy and Ni-based superalloys. Intermediate temperature embritttement (ITE) is a general phenomenon in Ni alloys and recently was interpreted by dynamic strain aging (DSA). The relationship between ITE and DSA was studied by a binary Ni-Bi alloy. The experimental alloy of well-controlled purity was produced by vacuum induction inching and then heat-treated properly. Tensile tests were performed at various tensile temperatures, and the elongation at fracture was used to indicate the ductility. In order to identify the mechanisms of fracture and ITE, fracture morphologies of the samples of low ductility were observed by scanning electron microscopy. According to the tensile ductility, Ni-Bi alloy shows an obvious embrittlement behavior in the intermediate temperature range (700--750℃ ). However, the stress strain curves of Ni-Bi alloy and the fracture morphologies indicate that DSA does not exist over the whole temperature range. Based on the experimental results and literatures, the interpretation of DSA was then discussed and proved to be invalid for elucidating the general feature of ITE in Ni-Bi alloy and Ni-based superalloys.
出处 《Journal of Iron and Steel Research(International)》 SCIE EI CAS CSCD 2015年第7期602-606,共5页 钢铁研究学报(英文版)
基金 Item Sponsored by National Natural Science Foundation of China(51001011) Fundamental Research Funds for the Central Universities of China(FRF-TP-12-042A) Fok Ying Tong Education Foundation(141043)
关键词 intermediate temperature embrittlement Ni-Bi alloy dynamic strain aging stress-strain curve fracture morpbology intermediate temperature embrittlement Ni-Bi alloy dynamic strain aging stress-strain curve fracture morpbology
  • 相关文献

参考文献26

  • 1L. Zheng, R. Chellali, R. Schlesiger, D. Baither, G. Schmitz,Scripta Mater. 65 (2011) 428-431.
  • 2R. Sharghi-Moshtaghin, S. Asgari, J. Mater. Process. Technol 147 (2004) 343-350.
  • 3R.R. Jensen, J.K. Tien, Metall. Trans. A 16 (1985) 1049- 1068.
  • 4G. H. Bai, J. S. Li, R. Hu, Z. W. Tang, X. Y. Mater. Sci. Eng. A 528 (2011) 1974-1978.
  • 5Z.W. Lian, J.J. Yu, X.F. Sun, H.R. Guan, ter. Sci. Eng. A 489 (2008) 227-233.
  • 6Xue, H. Z. Fu Z.Q. Hu, Ma A. K. Roy, J. Pal, C. Mukhopadhyay, Mater. Sci. Eng. A 474 (2008) 363-370.
  • 7A. K. Roy, R. S. Koripelli, J. Pal, Int. J. Hydrogen Energy 33 (2008) 945-952.
  • 8A. K. Roy, A. Venkatesh, V. Marthandam, A. Ghosh, J. Ma- ter. Eng. Perform. 17 (2008) 607-611.
  • 9C. Y. Cui, Y. F. Gu, Y. Yuan, H. Harada, Scripta Mater. 64 (2011) 502-505.
  • 10K. Gopinath, A.K. Gogia, S.V. Kamat, U. Ramamurty, Aeta Mater. 57 (2009) 1243-1253.

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部