期刊文献+

蒙特卡洛法模拟Ti-IF钢退火状态下的晶粒长大 被引量:2

Grain growth of Ti-IF steel simulated by Monte Carlo during annealing
原文传递
导出
摘要 通过三维蒙特卡洛法模拟Ti-IF钢在850℃的晶粒长大趋势图与实物试验数据拟合的趋势图。结果表明,随着退火时间的延长,晶粒不断长大,其长大规律符合D2.8-D2.80=kt关系式,模拟的晶粒尺寸与分布符合试验结果。蒙特卡洛法模拟晶粒长大对TiIF退火组织的改善提供了理论依据。 A comparison was done between the curve which was applied by a three dimensional Monte Carlo method to simulate the Ti-IF steel evolution of grain growth during annealing at 850 ℃ and experimental curve. The results show that the grain size increases with the prolonging of annealing time,and the kinetics of grain growth could be well described by the equation,D2. 8-D2. 80= kt. Further,The predicted mean grain size and grain size distribution agree with the measured results. Monte Carlo simulation of grain growth in annealing treatment of Ti-IF steel provides a theoretical basis for improving annealing Ti-IF microstructure.
作者 张晓宁
出处 《金属热处理》 CAS CSCD 北大核心 2015年第7期172-175,共4页 Heat Treatment of Metals
关键词 TI-IF钢 晶粒长大 蒙特卡洛法模拟 Ti-IF steel grain growth Monte Carlo simulation
  • 相关文献

参考文献2

二级参考文献18

  • 1王昭东,郭艳辉,赵忠,孙大庆.应用铁素体区热轧工艺开发超低碳热轧深冲板[J].东北大学学报(自然科学版),2005,26(8):747-750. 被引量:16
  • 2张红梅,刘英义,蒋奇武.变形温度对高强IF钢应力-应变曲线及组织的影响[J].热加工工艺,2006,35(1):76-78. 被引量:6
  • 3景财年,王作成,韩福涛,衣彦宏,张文平.热轧Ti-IF钢析出物的研究[J].金属热处理,2006,31(1):79-82. 被引量:22
  • 4王利.汽车用高强度IF薄钢板[J].宝钢技术,1997(1):58-61. 被引量:30
  • 5Hayakawa Y, Szpunar J A. Modeling of texture development during recrystallization of interstitial free steel [ J]. Acta Materialia, 1997,45 (6) : 2425-2434.
  • 6Wagner F, Bozzolo N, Van Landuyt O, et al. Evolution of recrystallisation texture and microstructure in low alloyed titanium sheets [ J 1. Acta Materialia, 2002, 50 (5) : 1245-1259.
  • 7L. S. Tóth,J. J. Jonas,D. Daniel,R. K. Ray.Development of ferrite rolling textures in low- and extra low-carbon steels[J].Metallurgical Transactions A.1990(11)
  • 8WANG Zuo-cheng.Stuy on the Effect of Metallurgical Factors on the Microstructure and Properties of Ultra-Low Carbon High Strength IF Steel[]..1994
  • 9Juntunen P,Raabe D,Karjalainen P,et al.Opti mizing Contin- uous Annealing of Interstitial-Free Steels for I mproving DeepDrawability[].Metallurgical and Materials Transactions : Physical Metallurgy and Materials Science.2001
  • 10Tung Lam Kai,Quadir MZ,Duggan BJ.A Novel Rolling-An- nealing Cycle for Enhanced Deep Drawing Properties in IF Steels[].Key Engineering.2002

共引文献10

同被引文献66

引证文献2

二级引证文献13

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部