期刊文献+

La_(0.7)Sr_(0.3)MnO_3对3Y-ZrO_2烧结致密化和性能的影响

Effect of La_(0.7)Sr_(0.3)MnO_3 on sintering densification and performance of 3Y-ZrO_2
下载PDF
导出
摘要 研究La0.7Sr0.3MnO3(LSMO)对3Y-ZrO2陶瓷的助烧作用以及性能的影响。结果表明:LSMO的加入可使氧化锆致密化烧成温度由纯3Y-ZrO2陶瓷的1450℃降低到1370℃;当掺入的摩尔分数为2%时,陶瓷韧性可由初始的5.5MPa·m1/2增加到9MPa·m1/2。材料低温烧结带来的ZrO2晶粒细化以及LSMO/ZrO2原位反应新生相颗粒对裂纹扩展的阻碍作用有助于提高材料韧性。 The effect of La0.7Sr0.3Mn O3(LSMO)on sintering and toughness performance of 3Y-ZrO2 ceramics was studied. The result indicates that the addition of LSMO decreases the sintering temperature of zirconia from 1 450 ℃ to 1 370 ℃,and the toughness of ceramics increases from 5.5 MPa·m^1/2to 9 MPa·m^1/2when the adding amount is 2%. The grain refinement resulting from lower sintering temperature and the new grains from the reaction of LSMO/ZrO2 lead to the toughness improvement.
出处 《兵器材料科学与工程》 CAS CSCD 北大核心 2015年第4期56-61,共6页 Ordnance Material Science and Engineering
关键词 LA0.7SR0.3MNO3 ZRO2 增韧 显微结构 La0.7Sr0.3MnO3 zirconia toughness microstructure
  • 相关文献

参考文献4

二级参考文献4

  • 1沈志坚,中国科学院高性能陶瓷与超微结构开放实验室年报,1989年,55页
  • 2M.V.斯温 郭景坤等(译).陶瓷的结构与性能.材料与科学技术丛书:第11卷[M].北京:科学技术出版社,1998..
  • 3Cheng Y,J Am Ceram Soc,1993年,76卷,3期,683页
  • 4叶瑞伦,无机材料物理化学,1986年,56页

共引文献25

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部