期刊文献+

热塑性挤出制品表面质量的影响因素

Influencing Factors of Surface Quality of Thermoplastic Extrusion Products
原文传递
导出
摘要 以聚丙烯(PP)为基体,研究了热塑性挤出制品表面质量的影响因素,并用Matlab对实验数据进行了拟合。结果表明:剪切速率、温度、口模长径比以及硅酮母粒对制品表面粗糙度都有影响,随着剪切速率、口模长径比的增加以及温度的降低,表面粗糙度增加;硅酮母粒的添加在一定程度上降低了制品的表面粗糙度。 The influencing factors of surface quality of extrusion products with PP as matrix were studied, and the Matlab was used to fit the experimental data. The results indicate that shearing rate, temperature, length to diameter ratio of die and the additives all have influence on the surface roughness of products. With the increasing of shearing rate and the length to diameter ratio of die, and with the decreasing of temperature, the surface roughness increases. The surface roughness decreases on a certain degree with addition of silicone master-batches.
出处 《塑料科技》 CAS 北大核心 2015年第8期60-63,共4页 Plastics Science and Technology
关键词 聚丙烯 表面粗糙度 剪切速率 口模长径比 温度 添加物 PP Surface roughness Shearing rate Length to diameter ratio of die Temperature Additives
  • 相关文献

参考文献10

  • 1代丽君,张玉军,姜华珺.高分子概论[M].北京:化学工业出版社,2007:99.
  • 2Cogswel F N.Stretching flow instabilities at the exits of extrusion dies[J].Journal of Non-Newtonian Fluid Mechanics,1997,2:37-47.
  • 3Moynihan R H,Baird D G,Ramanathan R.Additional observations on the surface melt fracture-behavior of linear low-density polyethylene[J].Journal of Non-Newtonian Fluid Mechanics,1990,36:255-263.
  • 4Rulande Rutgers,Malcolm Mackley.Correlation of experimental surface extrusion instabilities with numerically predicted exit surface stress concentrations and melt strength for linear low density polyethylene[J].Journal of Rheology,2000,44(6):1 319-1 334.
  • 5Wang S Q,Drda P A.Superfluid-like stick-slip transition in capillary flow of linear polyethylene melts.1.General features[J].Macromolecules,1996,29(6):2 627-2 632.
  • 6Wang S Q,Drda P A.Stick-slip transition in capillary flow of polyethylene.2.Molecular weight dependence and lowtemperature anomaly[J].Macromolecules,1996,29(11):4 115-4 119.
  • 7Legrand F,Piau J-M.Spatially resolved stress birefringence and flow visualization in the flow instabilities of a polydimethylsiloxane extruded through a slit die[J].Journal of Non-Newtonian Fluid Mechanics,1998,77(1-2):123-150.
  • 8Migler,Kalman B.Extensional deformation,cohesive failure,and boundary conditions during sharkskin melt fracture[J].Journal of Rheology,2002,46(2):383-400.
  • 9吴映辉,王鹏驹.塑料熔体挤出过程中不稳定流动的研究[J].高分子材料科学与工程,1991,7(4):102-105. 被引量:1
  • 10C·劳温代尔[德].塑料挤出[M].陈文瑛,等,译.北京:中国轻工业出版社,1996:229.

二级参考文献3

  • 1Han C D,J Appl Polym Sci,1973年,17卷,1403页
  • 2Han C D,Polym Eng Sci,1972年,12卷,77页
  • 3Han C D,Polym Eng Sci,1971年,11卷,385页

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部