摘要
将偏心齿轮-非圆齿轮行星系应用于插秧机分插机构中,研制出混合齿轮行星系分插机构。建立偏心齿轮与非圆齿轮的节曲线数学模型,获取齿轮节曲线方程,并结合KISSSOFT和MATLAB软件对非圆齿轮进行设计。建立分插机构运动数学模型,利用MATLAB开发优化辅助软件,对分插机构的参数进行优化。完成了分插机构的三维CAD设计,并在ADAMS中对分插机构进行了运动学虚拟仿真,获取了秧针尖点的静态轨迹和动态轨迹,将其与理论分析得到的轨迹曲线进行对比,验证了混合齿轮行星系应用于插秧机分插机构上的可行性。
Transplanting mechanism with planetary spur gears and non-circular gear was developed,in which planetary gear train with eccentric gears and non-circular gear is used. The mathematicalmodel of eccentric gear and non-circular gear＇s pitch curve was established and the gear pitch curveequation was obtained. Combining the KISSSOFT with MATLAB software to design the non-circulargear, kinematic models of the transplanting mechanism are established, and optimized the parametersof the mechanism by using self-compiled packages based on MATLAB. Virtual prototype simulationin ADAMS was performed after finishing the 2D and 3D design of the transplanting mechanism. Thestatic trajectory and dynamic trajectory of the needle tip are obtained, and compared these with thoseof theoretical analysis. The results verify the feasibility of transplanting mechanism with planetaryspur gears and non-circular gear which was applied on transplanter.
出处
《图学学报》
CSCD
北大核心
2015年第4期609-614,共6页
Journal of Graphics
基金
广东省自然科学基金资助项目(S2012020010997)
公益性行业(农业)科研专项资助项目(201203059)
现代农业产业技术体系建设专项资金资助项目(CARS-01-33)
关键词
分插机构
非圆齿轮
行星轮系
设计
仿真
transplanting mechanism
non-circular gear
planetary spur gears
design
simulation
