摘要
设计分为激光枪打靶和激光枪着落点识别两个部分。在正式打靶前,需要手动按键进行靶心和靶环间的距离校准,校准完成后可正式打靶。正式打靶时,手动按键控制激光枪上下左右移动并发射激光束,通过按键控制摄像头采集激光点的信息。采集完成后,通过按键控制在液晶显示屏上显示相应的闪烁点,同时在显示屏上显示激光点的方位信息和环数信息。
This design is divided into two parts, namely, shooting of laser gun and recognition of laser gun placement. Before target practice, it is necessary to press a button manually to calibrate the distance between the bull ＇ s eye and target rings. During target practice, we use manual buttons to move the laser gun up and down about and transmit laser beams, and we can acquire laser point information through the button controlling the camera. After completion of information acquisition, through button control we can display the flashing points as well as orientation information and ring number information of laser points.
出处
《电气自动化》
2015年第4期87-89,共3页
Electrical Automation
关键词
打靶
激光枪
摄像头
识别
方位
环数
target practice
laser gun
camera
recognition
direction
ring number
