期刊文献+

鄂尔多斯盆地致密油水平井体积压裂优化设计 被引量:30

Optimization design for volume fracturing of horizontal wells in tight oil reservoir of Ordos Basin
下载PDF
导出
摘要 鄂尔多斯盆地长7 致密油储层致密、油藏低压.储层天然微裂缝发育程度和岩石脆性评价表明,盆地致密油储层物性对水平井分段体积压裂具有良好的适应性.以提高水平井多段压裂井网形式和布缝的匹配性为目的,优化了与注采井网相适配的施工参数,结果表明,实现体积压裂的排量为4-8 m^3/min,单段砂量40-80 m^3,入地液量300-700 m^3,并形成了“低黏液体造缝、高黏液体携砂、组合粒径支撑剂、不同排量注入”的混合压裂设计模式.矿场井下微地震监测对比了体积压裂与常规压裂对裂缝扩展形态的影响,结果显示致密储层采用体积压裂的改造体积和复杂指数是常规压裂的2 倍左右,且与井网适配性良好.通过开展致密油开发矿场先导性试验,水平井单井初期产量达到8~10 t/d,第1 年累计产油量达2 000 t 左右,且无裂缝性见水井,证明对于鄂尔多斯盆地的致密油开发,采用水平井五点井网+ 混合水体积压裂可以获得较高的单井产量和良好的开发效益.该项技术对其他油田的非常规储层开发有一定的借鉴意义. Chang 7 tight oil reservoir of Ordos Basin features tight and low-pressure reservoir. It is shown from natural microfracture development degree and rock brittleness assessment of the reservoir that, properties of tight oil reservoir of the basin are highly adaptable to segmented volume fracturing of horizontal wells. The construction parameters which match with lfood pattern are optimized for the purpose of improving compatibility between multi-segment fracturing pattern form and fracture distribution of horizontal wells, and results indicate that volume fracturing is realized by displacement between 4 m3/min to 8m3/min, single-segment sand amount between 40 m3 to 80 m3, and buried liquid amount between 300 m3 to 700 m3. The mixed fracturing design mode of fracture formation by low-viscosity liquid, sand carrying by high-viscosity liquid, propping agent with combined grain sizes, and injection with different displacements is formed. Inlfuence on fracture spreading form by volume fracturing is compared with that on fracture spreading form by conventional fracturing in underground micro-seismic monitoring in mine ifeld, and results show that transformation volume and complexity indicator for tight oil reservoir by volume fracturing are about 2 times of those for tight oil reservoir by conventional fracturing, and the data match with well pattern properly. It can be seen from pilot test for tight oil exploitation in mine ifeld that initial output of a single horizontal well reaches 8 t/d to 10 t/d, accumulative oil production reaches about 2 000 t in the ifrst year, and there is no breakthrough well with fracture It proves that for tight oil exploitation of Ordos Basin, the technology of ifve-point pattern with mixed water volume fracturing for horizontal wells can realize high single-well output and favorable exploitation beneifts. Therefore, the technology is of certain signiifcance for reference for exploitation of unconventional reservoirs of other oilifelds.
出处 《石油钻采工艺》 CAS CSCD 北大核心 2015年第4期83-86,共4页 Oil Drilling & Production Technology
基金 国家科技重大专项"超低渗透油藏有效开采技术"(编号:2011ZX05013-004) 中石油科技项目"鄂尔多斯盆地致密油开发先导性试验"(编号:2011E-2602-07)
关键词 致密油藏 水平井 注采井网 体积压裂 优化设计 tight oil reservoir horizontal well flood pattern volume fracturing optimization design
  • 相关文献

参考文献14

  • 1慕立俊,李宪文,唐梅荣. 定向井体积压裂工艺设想及实践[C]∥ 2010 年第1 届国际压裂酸化大会论文集. 西安:西安石油大学出版社,2010:23-26.
  • 2杜现飞,李建山,齐银,陆红军,王成旺,殷桂琴.致密厚油层斜井多段压裂技术[J].石油钻采工艺,2012,34(4):61-63. 被引量:20
  • 3吴奇,胥云,刘玉章,丁云宏,王晓泉,王腾飞.美国页岩气体积改造技术现状及对我国的启示[J].石油钻采工艺,2011,33(2):1-7. 被引量:240
  • 4陈作,薛承瑾,蒋廷学,秦钰铭.页岩气井体积压裂技术在我国的应用建议[J].天然气工业,2010,30(10):30-32. 被引量:185
  • 5李宗田.水平井压裂技术现状与展望[J].石油钻采工艺,2009,31(6):13-18. 被引量:90
  • 6QI Yin, WU Zongfu, BAI Xiaohu, et al. Fracture designoptimization of horizontal wells targeting the chang 6formation in the Huaqing oilfield[R]. SPE 167008,2013.
  • 7OLSON J E. Multi-fracture propagation modeling:Applications to hydraulic fracturing in shales and tight gassands [C]. The 42nd U.S. Rock Mechanics Symposium(USRMS), 2008.
  • 8BEUGELSDIJK L J L, PATER C J D, SATO K.Experimental hydraulic fracture propagation in a multifracturedmedium[R]. SPE 59419, 2000.
  • 9RICKMAN R, MULLEN M, PETRE E, et al. Apractical use of shale petrophysics for stimulation designoptimization: All shale plays are not clones of theBarnett Shale[R]. SPE 115258, 2008.
  • 10WARPINSKI N R, MAYERHOFER M J, VINCENTM C, et al. Stimulating unconventional reservoirs:maximizing network growth while optimizing fractureconductivity[R]. SPE 114173, 2008.

二级参考文献63

共引文献673

同被引文献379

引证文献30

二级引证文献367

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部