期刊文献+

基于Petri网模型的铁路快捷货运产品可靠性评价 被引量:7

Railway Express Freight Product Reliability Evaluation Based on Petri Net Model
下载PDF
导出
摘要 为准确评价及预测铁路快捷货运产品的可靠性,在全面分析铁路快捷货运产品可靠性影响因素的基础上,建立用于产品可靠性评价的故障树模型,并采用下行法求取故障树的最小割集;结合Petri网建模方法与故障树基本理论,将产品故障树转化为Petri网仿真模型,并证明两者的等价性;利用Matlab仿真软件进行基于关联矩阵的Petri网模型求解,并以北京—上海间特快货物班列为例,得到该产品的可靠度及故障因素重要度排序.实证结果显示,应用Petri网模型来求解产品可靠性评价问题,不仅能够有效提升求解过程的效率,而且准确易行.研究成果可以为提高铁路快捷货运产品可靠性和市场竞争力提供科学依据和必要支撑. To accurately, evaluate the reliability of railway express freight product, on the basis of analysis on reliability influence factors of it, a fault tree is built, and the minimal cut sets of the fault tree is given. Combined with the basic theory of Petri net and fault tree analysis, the fault tree of railway express freight product is transformed into Petri net simulation model, and this transformation is proved to be an equivalent transformation. Using Matlab simulation software, the reliability and the importance of failure factors of railway express freight product between Beijing and Shanghai are obtained. Empirical results indicate the Petri net can solve the problem efficiently and effectively, which demonstrates feasibility of the method in addressing this problem. Research results of this paper will provide a scientific basis and necessary support in improving the reliability and market competitiveness of railway express freight product.
出处 《交通运输系统工程与信息》 EI CSCD 北大核心 2015年第4期147-153,共7页 Journal of Transportation Systems Engineering and Information Technology
基金 国家自然科学基金(71390332-3)
关键词 铁路运输 快捷货运产品 可靠性 故障树 PETRI网 railway transportation express freight product reliability fault tree Petri net
  • 相关文献

参考文献9

  • 1Lindsay N M, Parvathy A K. Simulation and application on power system reliability for bulk electrical system[M]. Springer India: Power Electronics and Renewable Energy Systems, 2015.
  • 2Coolen F P A, Coolen-Maturi T. Predictive inference for system reliability after common-cause component failures[J]. Reliability Engineering & System Safety, 2015, 135: 27-33.
  • 3Chang P C, Lin Y K. Fuzzy-based system reliability of alabour-intensive manufacturing network with repair[J]. International Journal of Production Research, 2014 (ahead-of-print): 1-16.
  • 4Chen C, Liu J, Taylor G A, et al. Power system reliability evaluation considering substation interior under protection failure impact[C]. Power System Technology (POWERCON), 2014 International Conference on, IEEE, 2014: 330-335.
  • 5李翔,李大伟,张蓉,王旭辉.基于Markov的模块化电传操纵系统软件可靠性模型[J].数学的实践与认识,2013,43(1):86-90. 被引量:3
  • 6Contini S, Matuzas V. Analysis of large fault trees based on functional decomposition[J]. Reliability Engineering & System Safety, 2011, 96(3): 383-390.
  • 7Majdara A, Wakabayashi T. Component-based modeling of systems for automated fault tree generation[J]. Reliability Engineering & System Safety, 2009, 94(6): 1076-1086.
  • 8张友生,李雄.基于Petri网的软件体系结构可靠性分析[J].计算机工程与应用,2006,42(25):69-73. 被引量:9
  • 9刘玲艳,吴晓平,田树新.基于粗糙集和Petri网的随机流网络可靠性评价方法[J].控制与决策,2010,25(8):1273-1276. 被引量:14

二级参考文献19

共引文献22

同被引文献68

引证文献7

二级引证文献43

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部