期刊文献+

液晶显示屏背光源模组表面缺陷自动光学检测系统设计 被引量:10

Defect Inspection System Design Based on the Automated Optical Inspection Technique for LCD Backlight Modules
下载PDF
导出
摘要 详细介绍了自动光学检测技术在液晶显示屏背光源模组表面缺陷在线检测中的应用,分析并比较了背光源模组缺陷自动光学在线检测中的成像技术、检测系统的组成、结构原理与设计方法,阐述了检测结果为不良品的返修方法。给出了背光源模组表面缺陷常见缺陷的种类和缺陷分类判断准则,把种类繁多的背光源模组表面缺陷分为画面缺陷、外观缺陷与异常缺陷;根据背光源模组缺陷形成的原因、种类,设计了背光源模组缺陷点灯检测和非点灯检测两种自动光学检测方案,所设计的自动光学检测方案对背光源模组组装产业开发缺陷检测系统具有有益的参考价值。 An automated optical inspection method and application for the surface defect inspection of LCD backlight module is presented. The imaging techniques ,inspection system composition, mechanical and electric control system prin- ciple ,and design methods are systematically illustrated. The review inspection method of non-conforming parts and repair strategy are also given. The typical types of the LCD bacldight module defects and the defect classification criterions are listed. The wide variety of bacldight module surface defects are categorized into three types:the picture defects,the ap- pearance of defects and abnormalities defects. Two AOI detection methods,lighting method and non-lighting method, are introduced according to the causes and types of the defects. The AOI technique given is expected to have a beneficial ref- erence value for the industrial development of the defect detection system for LCD backlight modules.
出处 《传感技术学报》 CAS CSCD 北大核心 2015年第5期768-773,共6页 Chinese Journal of Sensors and Actuators
基金 安徽省高校自然科学研究项目(KJ2013B255) 国家重大科学仪器设备开发专项(2013YQ220749)
关键词 自动光学检测 背光源模组 表面缺陷 automated optical inspection LCD backlight module surface defects
  • 相关文献

参考文献10

  • 1Lu B S,Shi Y Q,Li Q,et al. AOI Techniques for Surface Defect In- spection[ J:. Applied Mechanics and Materials,2010,36:297-302.
  • 2http://en, wikipedia.org/wiki/Automated optical_inspection.
  • 3Du-Ming Tsai, Hsin-Yang Tsai. Low-Contrast Surface Inspection of Mum Defects in Liquid Crystal Displays Using Optical Flow-Based Motion Analysis [ J ]. Machine Vision and Applications, 2011,22: 629- 649.
  • 4张洪涛,段发阶,丁克勤,叶声华.钢板表面缺陷在线视觉检测系统研究[J].传感技术学报,2007,20(8):1899-1902. 被引量:14
  • 5Henry Y T, Ngan a, Grantham K H Pang, et al. Automated Fabric Defect Detection-A Review [ J ]. Image and Vision Computing, 2011,29:442-458.
  • 6Whitehouse D J. Handbook of Surface and Nanometrology [ M ]. 2nd Ed. CRC Press Inc,2010.
  • 7Jahr I. Lighting in Machine Vision, Handbook of Machine Vision [ M]. 2007:73-203.
  • 8Liu Yan, Yu Feihong. Automatic Inspection System of Surface De- fects on Optical IR-CUT Filter Based on Machine Vision [ J ]. Optics and Lasers in Engineering,2014,55:243-257.
  • 9韩芳芳,段发阶,王凯,张宝峰.机器视觉检测系统中相机景深问题的研究与建模[J].传感技术学报,2010,23(12):1744-1747. 被引量:21
  • 10https://www.teledynedalsa.com/imaging/products/camems/hs-line-scar:piranha-es/ES-80-08K80/.

二级参考文献19

共引文献33

同被引文献61

引证文献10

二级引证文献125

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部