摘要
选用304不锈钢8μm纤维,纺制91tex×2不锈钢纤维纱线。根据不锈钢纤维的摩擦因数大和纤维之间缺少抱合力等特点,选用短流程工艺,细纱工序采用"低速度、中捻度、大隔距"的工艺原则,并形成了完整的纺纱制线工艺及其技术措施,可用于指导不锈钢纤维纱线规模化生产。
91 tex× 2 stainless steel fiber wire was woven using 304 stainless steel 8μm fiber. The principles of "low speed, moderate twist and large gauge" were selected according to the characteristic of friction coefficient and lack of cohesion between stainless steel fibers. A complete spinning technology and technical measures were formed to guide the large-scale production of stainless steel fiber.
出处
《纺织科技进展》
CAS
2015年第4期35-37,共3页
Progress in Textile Science & Technology
关键词
不锈钢纤维
工艺技术
规模化生产
stainless steel fiber
process technology
large-scale production