期刊文献+

热处理对搅拌摩擦原位TiB_2/7075复合材料组织和性能的影响 被引量:3

Effects of heat treatment after friction stir processing on properties of in-situ TiB_2/7075 composite
原文传递
导出
摘要 对原位自生Ti B2/7075复合材料进行了搅拌摩擦加工,并对加工后的材料进行了不同方式的热处理。使用电子背散射衍射、EDS元素扫描分析和室温拉伸测试等方法对经过不同热处理方式的复合材料进行了研究。研究结果表明,在搅拌摩擦加工后对材料进行强化T6处理,即延长固溶时间,可以明显提高复合材料的力学性能。相比于搅拌摩擦加工后未经任何热处理的Ti B2/7075复合材料,强化T6处理后的复合材料强度提高了148 MPa,塑性提高了1.2倍。对强化T6处理后复合材料力学性能提高的原因进行了讨论。 In situ TiB2/7075 composites were processed by friction stir processing, following by different heat treatments. Microstructure of the composites after different heat treatments was analyzed by electron back-scattered diffraction(EBSD) and energy dispersive spectrometer (EDS). The tensile properties were also tested. The results indicate that increasing the solution time has effectively improved the microstructure uniformity of the composites. Compared to the composite after friction stir processing, the tensile strength of these composites increases by 148 MPa, and the elongation increases by 1. 2 times. The reason of tensile property improving has been discussed.
出处 《金属热处理》 CAS CSCD 北大核心 2015年第8期96-100,共5页 Heat Treatment of Metals
关键词 复合材料 搅拌摩擦加工 T6处理 电子背散射衍射(EBSD) composite friction stir processing(FSP) T6 treatment electron back-scattered diffraction (EBSD)
  • 相关文献

参考文献17

  • 1Dinaharan I, Murugan N. Effect of friction stir welding on microstructure, mechanical and wear properties of AA6061/ZrB2in situ cast composites[ J~. Materials Science and Engineering: A, 2012, 543 : 257-266.
  • 2Soon-Jik Hong, Hong-Moule Kim, Dae Huh, et al. Effect of clustering on the mechanical properties of SiC particulate-reinforced aluminum alloy 2024 metal matrix composites [ J ]. Materials Science and Engineering: A, 2003, 347(1/2) : 198-204.
  • 3郝斌,崔华,张济山,杨滨,田晓风,樊建中.液氮球磨制备纳米SiCP/Al基复合材料的研究[J].金属热处理,2007,32(1):49-52. 被引量:3
  • 4Schaffer P L, Miller D N, Dahle A K. Crystallography of engulfed and pushed TiB2particles in aluminium [ J ]. Scripta Materialia, 2007, 57 (12) : 1129-1132.
  • 5张建平,乐永康,毛建伟.原位自生TiB_2/7055复合材料的组织与力学性能[J].特种铸造及有色合金,2009,29(3):249-251. 被引量:7
  • 6张淑英,孟繁琴,陈玉勇,李庆春.颗粒增强金属基复合材料的研究进展[J].材料导报,1996,10(2):66-71. 被引量:34
  • 7Ma S M, Zhang P, Ji G, et al. Microstrncture and mechanical properties of friction stir processed A1-Mg-Si alloys dispersion- strengthened by nanosized TiB2 particles [ J ]. Journal of Alloys and Compounds, 2014, 616: 128-136.
  • 8Mishra R S, Ma Z Y. Friction stir welding and processing [ J ]. Materials Science and Engineering: R: Reports, 2005, 50(1/2): 1-78.
  • 9Morisada Y, Fujii H, Nagaoka T, et al. Effect of friction stir processing with SiC particles on microstructure and hardness of AZ31 [ J ]. Materials Science and Engineering: A, 2006, 433 (1/2) : 50-54.
  • 10许辰苏,吴洁琼,章鹏,陈科,李险峰,王浩伟.搅拌摩擦加工对原位TiB_2/7075复合材料性能的影响[J].材料研究学报,2013,27(2):197-201. 被引量:8

二级参考文献107

共引文献73

同被引文献27

引证文献3

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部