期刊文献+

两种浓度咖啡因对牙科合金耐细菌腐蚀性能的影响

Influence of caffeine on anti-corrosion behavior of dental alloys to bacteria
下载PDF
导出
摘要 目的:研究咖啡因对牙科铸造合金耐细菌腐蚀性能的影响。方法:将镍铬合金试件和纯钛试件分为人工唾液,1.5mmol/L和5.0mmol/L咖啡因人工唾液溶液三个组。选择变形链球菌和血链球菌为实验菌,培养并配制成浓度为5×106cfu/mL的菌液。镍铬合金和纯钛试件按分组浸泡48h后取出加入到配制好的实验菌液中,于厌氧箱培养72h后用酶标仪检测合金表面细菌浓度并用原子力显微镜观察合金表面粗糙度。结果:酶标仪检测结果显示咖啡因组合金表面两种细菌的粘附量均小于人工唾液组,且随着咖啡因浓度的增加,细菌粘附量进一步减小,差异有统计学意义(P<0.01)。相同浓度咖啡因组,镍铬合金表面细菌粘附量显著小于纯钛(P<0.01)。原子力显微镜结果显示咖啡因组合金表面粗糙度显著小于人工唾液组(P<0.01)。相同浓度咖啡因组,镍铬合金表面粗糙度比纯钛小,差异有统计学意义(P<0.01)。结论:咖啡因可提高镍铬合金和纯钛对变形链球菌和血链球菌的耐腐蚀能力,对镍铬合金耐腐蚀的性能提高较纯钛显著。 Objective: To evaluate influence of caffeine on anti-corrosion behavior of dental alloys to bacteria. Methods:Ni-Cr and pure titanium specimens were divided into three groups, artificial saliva, artificial saliva with caffeine in concentrations of 1.5mmol/L and 5.0mmol/L. Streptococcus mutans and Streptococcus sanguis were cultured as experimental bacteria and prepared with the concentration of 5 ×10^6cfu/m L. After dipping specimens into solution for 48h, the specimens were cultured with bacteria in the anaerobic chamber for 72h, detected by microplate reader and the roughness of specimens were scanned by atomic force microscopy(AFM). Results: The amount of the two kinds of bacteria attached on the working surface of Ni-Cr and pure titanium specimens significantly decreased in the presence of caffeine compared to the artificial saliva group(P〈0.01). The amount of attached bacteria decreased as the concentration of caffeine increases(P〈0.01).After dipping into the same concentration of caffeine solution, the amount of bacteria attached on Ni-Cr alloys were lower than pure titanium(P〈0.01). The results of AFM suggest the roughness of both the alloys were significant lower in the presence of caffeine than artificial saliva group(P〈0.01). The roughness of Ni-Cr alloys was significant lower than pure titanium in the presence of same concentration of caffeine(P〈0.01). Conclusion: The study shows the inhibitory capability of caffeine to both Ni-Cr and pure titanium in the circumstance of S. mutans and S. sanguis. The anti-corrosion capability of Ni-Cr alloys significant increases in the presence of caffeine compared to pure titanium.
出处 《口腔颌面修复学杂志》 2015年第4期197-202,共6页 Chinese Journal of Prosthodontics
基金 国家自然科学基金项目(项目编号:30970726) 上海市科委项目(项目编号:114119a3700)
关键词 咖啡因 牙科合金 腐蚀 缓蚀剂 caffeine dental alloys corrosion corrosion inhibitor
  • 相关文献

参考文献22

  • 1Quirynen M, Marechal M, Busscher H J, et al. The inIluence of surface free energy and surface roughness on early plaque formation. An in vivo study in man[J]. J Clin periodontol, 1990, 17(3): 138-144.
  • 2Aykent F, Yondem I, Ozyesil A, et al. Effect of different finishing techniques for restorative materials on surface roughness and bacterial adhesion[J]. J Prosthet Dent, 2010, 103(4): 221-227.
  • 3Rammohan S, Juvvadi S, Gandikota C, et al. Adherence of Streptococcus mutans and Candida albicans to different bracket materials[J]. J Pharm Bioallied Sci, 2012, 4 (2): 212-216.
  • 4Orosser F, Ooncalves R. Electrochemical evidence of caffeine adsorption on zinc surface in ethanol[J]. Corros Sci, 2008, 50 (10): 2934-2938.
  • 5Trindade L, Goncalves R. Evidence of caffeine absorption on a low-carbon steel surface in ethanol[J]. Corros Sci, 2009, 51(3): 1578-1583.
  • 6Rajendran S, Joice M. Corrosion inhibition by the cafleine [J]. CorrosSci, 2004, 22(8): 229-233.
  • 7Nafisi S, Shamloo D. A comparative study of caffeine and theophylline binding to Mg( II ) and Ca( n )ions.. studied by FTIR and UV spectroscopic methods[J]. J Mol Struct, 2002, 608(8): 1-7.
  • 8Raja P, Sethuraman M. Natural products as corrosion in- hibitor for metals in corrosive media[J].Mater lett, 2008, 52 (1):113-116.
  • 9王献利,白石柱,袁清敏,李冬梅,郭天文,弥谦.氮化钛镀膜后纯钛在不同氟浓度中的耐腐蚀性能研究[J].口腔颌面修复学杂志,2014,15(5):257-261. 被引量:2
  • 10于海利,陈丕铭,牟素丽,程玮.不同表面处理对纯钛的耐腐蚀性研究[J].口腔颌面修复学杂志,2014,15(5):314-317. 被引量:3

二级参考文献36

  • 1苏剑生,乔广艳,潘可风.牙科铸造合金的腐蚀及生物相容性研究进展[J].口腔颌面修复学杂志,2005,6(3):239-240. 被引量:6
  • 2李哲,肖茂春.铸造纯钛抛光方法的研究[J].华西口腔医学杂志,2006,24(3):214-216. 被引量:13
  • 3孙延,姚月玲,朱晓瑜,张冬梅,陈刚,钟科,黎永钧.非晶金刚石膜在口腔医学材料中的应用[J].新型炭材料,2007,22(1):40-46. 被引量:11
  • 4刘文科,周劬科.钛合金零件的离心滚筒研磨抛光[M].98中国材料研讨会:材料研究与应用新进展(总20).北京:化学工业出版社,1998:992-995.
  • 5刘啸晨,郭立童,高积强,郭天文,王晓洁,张惠,张琳琳,杨建峰.不同pH值和F^-浓度人工唾液对钛/瓷结合的影响[J].稀有金属材料与工程,2007,36(A02):31-33. 被引量:2
  • 6Jiecai Han, Jiaqi Zhu, Li Niu, et al. Superexceilent infrared protective coatings:Amorphous diamond films deposited by filtered cathodic vacuum arc technology [J]. Surface and Coating Technology, 2007, 201(9): 5323-5325.
  • 7ISO 10271-2011 (E) Dentistry-Corrosion test methods for metallic materials. International Standard[J]. Second edition, Switzerland, International Organization for Standar- dization, 2011.
  • 8JB/T7901-1999金属材料实验室均匀腐蚀全浸实验方法.中华人民共和国机械行业标准[S].北京:国家机械工业局,1999.
  • 9Waleed E, Ikuya W, Mari K. Elemental ion release from four different fixed prosthodontic materials[J]. Dental Materials, 2009, 25(8): 976-981.
  • 10Qiu Jing, Yu Wei-Oiang, Zhang Fu-Qiang, et al. Corrosion behaviour and surface analysis of a Co-Cr and two Ni-Cr dental alloys before and after simulated porcelain firing [J]. EurJofOralScience, 2011, ll9(1): 93-101.

共引文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部