期刊文献+

An extremely low power voltage reference with high PSRR for power-aware ASICs

An extremely low power voltage reference with high PSRR for power-aware ASICs
原文传递
导出
摘要 An extremely low power voltage reference without resistors is presented for power-aware ASICs. In order to reduce the power dissipation, an Oguey current reference source is used to reduce the static current; a cascode current mirror is used to increase the power supply rejection ratio (PSRR) and reduce the line sensitivity of the circuit. The voltage reference is fabricated in SMIC 0.18μm CMOS process. The measured results for the voltage reference demonstrate that the temperature coefficient of the voltage is 66 ppm/℃ in a range from 25 to 100 ℃. The line sensitivity is 0.9% in a supply voltage range of 1.8 to 3,3 V, and PSRR is -49 dB at 100 Hz. The power dissipation is 200 nW. The chip area is 0.01 mm2. The circuit can be used as an elementary circuit block for power-aware ASICs. An extremely low power voltage reference without resistors is presented for power-aware ASICs. In order to reduce the power dissipation, an Oguey current reference source is used to reduce the static current; a cascode current mirror is used to increase the power supply rejection ratio (PSRR) and reduce the line sensitivity of the circuit. The voltage reference is fabricated in SMIC 0.18μm CMOS process. The measured results for the voltage reference demonstrate that the temperature coefficient of the voltage is 66 ppm/℃ in a range from 25 to 100 ℃. The line sensitivity is 0.9% in a supply voltage range of 1.8 to 3,3 V, and PSRR is -49 dB at 100 Hz. The power dissipation is 200 nW. The chip area is 0.01 mm2. The circuit can be used as an elementary circuit block for power-aware ASICs.
出处 《Journal of Semiconductors》 EI CAS CSCD 2015年第9期131-135,共5页 半导体学报(英文版)
基金 Project supported by the National Natural Science Foundation of China(Nos.61161003,61264001,61166004) the Guangxi Natural Science Foundation(No.2013GXNSFAA019333)
关键词 ASICS extremely low power dissipation high power supply rejection ratio voltage reference source ASICs extremely low power dissipation high power supply rejection ratio voltage reference source
  • 相关文献

参考文献17

  • 1Ueno K, Hirose T, Asai T, et al. CMOS smart sensor for monitor- ing the quality of perishables. IEEE J Solid-State Circuits, 2007, 42(4): 798.
  • 2Chandrakasan A P, Daly D C, Kwong J, et al. Next generation micro-power systems. IEEE Symposium on VLSI Circuits, 2008: 2.
  • 3Leung K N, Mok P K T. A sub-1-V 15-ppm/C CMOS bandgapvoltage reference without requiring low threshold voltage device. IEEE J Solid-State Circuits, 2002, 37(4): 526.
  • 4Kai S, Min G, Huaibin Q, et al. A multiple transistor combina- tion low-voltage curvature-corrected bandgap reference. Journal of Semiconductors, 2013, 34(6): 065010.
  • 5Andreou C M, Koudounas S, Georgiou J. A novel wide- temperature-range, 3.9 ppm/C CMOS bandgap reference circuit. IEEE J Solid-State Circuits, 2012, 47(2): 574.
  • 6Zhou Z, Zhu P S, Shi Y, et al. A CMOS voltage reference based on mutual compensation of Vtn and Vtp. IEEE Trans Circuits Syst II: Express Briefs, 2012, 59(6): 341.
  • 7Acharya V, Banerjee B. A supply insensitive resistor-less bandgap reference with buffered output. IEEE Dallas Circuits and Systems Workshop (DCAS), 2010:1.
  • 8Osaki Y, Hirose T, Kuroki N, et al. 1.2-V supply, 100-nW, 1.09-V bandgap and 0.7-V supply, 52.5-nW, 0.55-V subbandgap refer- ence circuits for nanowatt CMOS LSIs. IEEE J Solid-State Cir- cuits, 2013, 48(6): 1530.
  • 9Hirose T, Ueno K, Kuroki N, et al. A CMOS bandgap and sub- bandgap voltage reference circuits for nanowatt power LSIs. IEEE Asian Solid State Circuits Conference (A-SSCC), 2010:1.
  • 10Buck A E, McDonald C L, Lewis S H, et al. A CMOS bandgap reference without resistors. IEEE J Solid-State Circuits, 2002,37(1): 81.

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部