期刊文献+

H型平面布置多层冷弯薄壁型钢结构抗震分析 被引量:1

Seismic analysis of the multilayer cold- formed thin- walled section steel structures with H plane layout
下载PDF
导出
摘要 基于H型钢截面良好的受力性能,设计了一种H型平面布置的多层冷弯薄壁型钢结构。结合有限元分析软件,对该结构进行了不同工况下的弹塑性地震时程计算,分析了结构的位移响应、层间位移、顶层加速度等参数。结果表明:(1)6种地震烈度下,结构层间位移角均满足规范要求。9度罕遇地震下,结构顶层X向最大位移为9.213mm,Y向最大位移为5.432mm,位移响应较小;(2)结构在高烈度地震下,顶层加速度超过10000mm/s2,结构颤动频率高,但是构件均未进入塑性,结构处于安全状态。综合分析结果,采用H型平面布置的多层冷弯薄壁型钢结构具有较好的抗震能力,建议工程中考虑使用该种平面布置方式。 based on the good mechanical properties of H section steel, a kind of multilayer cold - formed thin - walled steel structure with H -type layout was designed. Elastoplastic seismic response time history calculation of the structure under different working conditions was carried out, and the displacement response, drift of story and the acceleration of top floor of the structure were analyzed. The results show that : ( l ) the drift angle of the struc- ture meet the code requirements under six seismic intensities, the maximum displacement of the top floor in X-di- rection is 9. 213ram, that in Y-direction is 5. 432mm, i. e. smaller. (2) the acceleration response of the top floor is bigger than 10000mm/s2 under high intensity earthquake, and the structure shakes badly, but it is still in a safe state without the plastic deformation; comprehensive analysis results persent that, the multilayer cold -formed thin -walled steel structure with H layout has good seismic resistance capasity, and it is suggested to consider the use of this kind of plane layout for engineering.
出处 《世界地震工程》 CSCD 北大核心 2015年第3期178-184,共7页 World Earthquake Engineering
基金 国家高技术研究发展支撑计划(863计划)项目(2009AA032304) 四川省创新苗子工程资助项目(2015128) 西南科技大学实验技术项目(15syjs-12)
关键词 冷弯薄壁型钢 H型截面 加速度响应 位移响应 cold -formed thin-walled section steel H section acceleration response displacement response
  • 相关文献

参考文献7

二级参考文献27

  • 1刘彩玲,王泽军.钢框架结构整体抗震性能试验研究[J].四川建筑,2008,28(5):114-116. 被引量:5
  • 2周绪红,石宇,周天华,刘永健,周期石,狄谨,卢林枫.低层冷弯薄壁型钢结构住宅体系[J].建筑科学与工程学报,2005,22(2):1-14. 被引量:132
  • 3周天华,石宇,何保康,杨家骥,杨朋飞.冷弯型钢组合墙体抗剪承载力试验研究[J].西安建筑科技大学学报(自然科学版),2006,38(1):83-88. 被引量:59
  • 4JGJ101-1996,建筑抗震试验方法规程[S].北京:中国建筑工业出版社,1997
  • 5GB50011-2001建筑抗震设计规范[S].2008年版.北京:中国建筑工业出版社,2008.
  • 6GB50009--2001建筑结构荷载规范[s].2008年版.北京:中国建筑工业出版社,2008.
  • 7GB50011-2010建筑抗震设计规范[S].北京:中国建筑工业出版社,2010.
  • 8North American steel framing alliance year 2000 edition, prescriptive method for residential cold-formed steel framing[S].
  • 9AISI/COS/PM 2001, standard for cold-formed steel framing prescriptive method for one or two family dwellings[S].
  • 10AISI 2001, commentary for the standard for cold-formed steel framing-prescriptive method for one or two family dwellings[S].

共引文献205

同被引文献7

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部