期刊文献+

Preparation for Retarding and High Early Strength Concrete

Preparation for Retarding and High Early Strength Concrete
下载PDF
导出
摘要 The primary objective of this research was to determine optimum dosage of mixing concrete containing plasticizers and fly ash, consistent with desirable structural grade concrete properties. Factorial tests were also conducted to investigate the four main factors: water-cementing materials ratio, water content, content of superplasticizers (SP) and fly ash content. It was found that the requirement for setting time played the dominant role in shrinkage and anti-cracking, and fly ash played a critical role in workability and reducing heat of hydration but showed insignificant effects on slump, early strength and initial setting time of concrete. The primary objective of this research was to determine optimum dosage of mixing concrete containing plasticizers and fly ash, consistent with desirable structural grade concrete properties. Factorial tests were also conducted to investigate the four main factors: water-cementing materials ratio, water content, content of superplasticizers (SP) and fly ash content. It was found that the requirement for setting time played the dominant role in shrinkage and anti-cracking, and fly ash played a critical role in workability and reducing heat of hydration but showed insignificant effects on slump, early strength and initial setting time of concrete.
出处 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2015年第4期787-789,共3页 武汉理工大学学报(材料科学英文版)
基金 Funded by the National Natural Science Foundation of China(51409202) the Fundamental Research Funds for the Central Universities(2013-IV-36) the Jiangxi Provincial Project of Science and Technology(20132GGB70107)
关键词 high slump maintaining performance fly ash retarding and high early strength concrete initial setting time heat of hydration high slump maintaining performance fly ash retarding and high early strength concrete initial setting time heat of hydration
  • 相关文献

参考文献5

  • 1Slowik V, Schmidt M, Fritzsch R. Capillary Pressure in Fresh Cement- based Materials and Identification of the Air Entry Value[J]. Cement & Concrete Composites, 2008, (30) :557-565.
  • 2Standardization Administration of the People's Republic of China. Common Portland Cement (GB175)[P ]. China Standards Press, 2007.
  • 3Yeh I-Cheng. Optimization of Concrete Mix Proportioning Using a Flattened Simplex-centroid Mixture Design and Neural Networks[J]. Engineering with Computers, 2009, 25:179-190.
  • 4SHUI Z, LU J, TIAN S, et aL Preparation of New Cementitious System Using Fly Ash and Dehydrated Autoclaved Aerated Concrete[J]. Journal of Wuhan University of Technology- Materials Science Edition, 2014, 29(4): 726-732.
  • 5Atis CD. Heat Evolution of High Volume Fly Ash Concrete[J], Cem. Concr Res., 2002, 32(5):751-756.

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部