期刊文献+

Numerical investigation of granular flow similarity in rotating drums 被引量:4

Numerical investigation of granular flow similarity in rotating drums
原文传递
导出
摘要 The theory of flow similarity has not been well established for granular flows, in contrast to the case for conventional fluids, owing to a lack of reliable and general constitutive laws for their continuum descrip- tion. A rigorous investigation of the similarity of velocity fields in different granular systems would he valuable to theoretical studies. However, experimental measurements face technological and physical problems. Numerical simulations that employ the discrete element method (DEM) may be an alterna- tive to experiments by providing similar results, where quantitative analysis could be implemented with virtually no limitation. In this study, the similarity of velocity fields is investigated for the rolling regime of rotating drums by conducting simulations based on the DEM and using graphics processing units. For a constant Froude number, it is found that the particle-to-drum size ratio plays a dominant role in the determination of the velocity field, while the velocity field is much more sensitive to some material properties than to others. The implications of these findings are discussed in terms of establishing theoretical similarity laws for granular flows. The theory of flow similarity has not been well established for granular flows, in contrast to the case for conventional fluids, owing to a lack of reliable and general constitutive laws for their continuum descrip- tion. A rigorous investigation of the similarity of velocity fields in different granular systems would he valuable to theoretical studies. However, experimental measurements face technological and physical problems. Numerical simulations that employ the discrete element method (DEM) may be an alterna- tive to experiments by providing similar results, where quantitative analysis could be implemented with virtually no limitation. In this study, the similarity of velocity fields is investigated for the rolling regime of rotating drums by conducting simulations based on the DEM and using graphics processing units. For a constant Froude number, it is found that the particle-to-drum size ratio plays a dominant role in the determination of the velocity field, while the velocity field is much more sensitive to some material properties than to others. The implications of these findings are discussed in terms of establishing theoretical similarity laws for granular flows.
出处 《Particuology》 SCIE EI CAS CSCD 2015年第5期119-127,共9页 颗粒学报(英文版)
基金 supported by the National Key Basic Research Program of China under grant no.2015CB251402 the NationalNatural Science Foundation of China under grant nos.21206167, 21225628,and 51106168 the Chinese Academy of Sciences under grant nos.XDA07080203(the Strategic Priority Research Program) and XXH12503-02-03-03
关键词 Discrete element method Granular flow SIMILARITY Rotating drum Scale up Graphics processing unit Discrete element method Granular flow Similarity Rotating drum Scale up Graphics processing unit
  • 相关文献

参考文献1

二级参考文献19

  • 1Jain, N., Ottino, J. M., & Lueptow, R. M. (2005). Regimes of segregation and mixing in combined size and density granular systems: An experimental study. Granular Matter, 7(2), 69-81.
  • 2Jayasundara, C. T., Yang, R. Y., Yu, A. B., & Curry, D. (2008). Discrete particle simulation of particle flow in lsa Mill--Effect of grinding medium properties. Chemical Engineering Journal, 135,103-112.
  • 3Kwapinska, M., Saage, G., & Tsotsas, E. (2006). Mixing of particles in rotary drums: A comparison of discrete element simulations with experimental results and penetration models for thermal processes. Powder Technology, 161(1), 69-78.
  • 4Li, Y., Xu, Y., & Thornton, C. (2005). A comparison of discrete element simulations and experiments for 'sandpiles' composed of spherical particles. Powder Technology, 160(3), 219-228.
  • 5Liu, X., Ge, W., Xiao, Y., & Li, J. (2008). Granular flow in a rotating drum with gaps in the side wall. Powder Technology, 182, 241-249.
  • 6Mishra, B. K. (2003). A review of computer simulation of tumbling mills by the discrete element method: Part Ⅱ-Practical applications. International Journal of Mineral Processing, 71.95-112.
  • 7Mishra, B. K., & Thornton, C. (2002). An improved contact model for ball mill simulation by the discrete element method. Advanced Powder Technology, 13(1), 25-41.
  • 8Rajamani, R. K., Mishra, B. K., Venugopal, R., & Datta, A. (2000). Discrete element analysis of tumbling mills. Powder Technology, 109(1-3), 105-112.
  • 9Thornton, C., & Yin, K. K. (1991 ). Impact of elastic spheres with and without adhesion. Powder Technology, 65, 153 - 166.
  • 10Yamane, K. (2004). Discrete-element method application to mixing and segregation model in industrial blending system. Journal of Materials Research, 19(2), 623-627.

共引文献15

同被引文献17

引证文献4

二级引证文献11

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部