摘要
用Moldflow软件优化轿车水箱盖注射成型的模具温度。结果表明:模具温度在175℃时,胶料充模时间短,充模结束时的体积固化率小,充模后35 s时的体积固化率大。Moldflow软件可以优化橡胶制品的注射成型工艺,缩短工艺和模具设计周期,提高生产效率和产品质量。
In this study, the injection molding temperature of water tank cover for passenger car was optimized using Moldlfow. The results showed that, when the mold temperature was set at 175℃, the injection time was short, the volume curing rate at the end of injection was low, and the volume curing rate after 35 s was high. Moldflow was effective soRware to optimize rubber injection molding process, shorten the process and mold design cycle, and improve production efficiency and product quality.
出处
《橡胶科技》
2015年第9期44-48,共5页
Rubber Science and Technology
