摘要
以贵州发耳煤矿7~#煤层为研究对象,分析了发耳煤矿现有下行孔注浆封孔测压技术中存在的问题,提出了三堵两段式注浆封孔测压方法。该技术的应用解决了下行孔封孔测压时受孔内积水或围岩裂隙水影响封孔质量问题,现场应用取得了良好效果,为下行孔测定瓦斯压力积累了宝贵的实践经验。
The paper takes the No. 7 coal seam of Faer Coal Mine in Guizhou as the research object, the existing problems of the downward hole grouting technology for hole sealing and gas pressure measurement in the coal mine were analyzed, and the technology of gas pressure meas- urement by hole grouting with the two separation section by three block type was put forward. The application of this technology has solved the problem that the water in the hole and surrounding rock fissure affected the hole sealing quality in the process of downward hole sealing for gas pressure measurement and has a good effect on the field application, which accumulates valuable practical experience for the gas pressure measurement of the downward hole.
出处
《中国煤炭》
北大核心
2015年第9期101-103,共3页
China Coal
基金
贵州省教育厅项目(Z134016)
贵州省重大应用基础研究项目(Z143160)
贵州省科技厅工业攻关项目(Z113166)
贵州发耳煤矿保护层开采效果研究(H140670)
贵州大学研究生创新基金(研理工2015070)
关键词
煤层瓦斯压力
注浆测压
下行孔
三堵两段式
coal seam gas pressure, gas pressure measurement by hole grouting, downward hole, two separation section by three block type
