摘要
基于有限元软件ABAQUS对钢框架节点(全焊节点和栓焊节点)进行了非线性动态响应数值仿真模拟分析,模型合理考虑了螺栓预紧力、接触、非线性大变形及应变率效应等因素。采用该模型模拟梁柱节点子结构抗冲击试验,分析结果表明,采用显示求解器可获得较好精度和稳定性,有限元模拟的破坏模态、冲击力和位移时程曲线等结果与试验结果吻合良好。在大变形下过焊孔趾部是节点应力集中最显著的部位,是整个构件破坏的起始点。通过仿真分析,可获得梁柱节点子结构在冲击荷载作用下的动态响应和内力发展过程,该数值分析方法为深入研究钢结构抗倒塌工作机理并为合理评估其抗倒塌变形和耗能能力提供依据。
Two kinds of widely used steel anti-moment connections (welded unreinforced tlange-welded web and welded unreinforced flange-bohed web) were modeled by using the finite element software ABAQUS, taking the effects of and good stability. As a result, the finite element results of failure mode and time histories of impact load and deformation agree fairly well with experimental results. Under large deformation, the most significant stress concentration locates at the weld access hole, where initiates the whole component failure. The dynamic response and internal force development of beam-column substructures were obtained by simulation analysis. The results of numerical analysis provide a basis for studying the working mechanism of progressive collapse of steel structures and for rationally accessing the ability of resisting collapse deformation and energy dissipation.
出处
《振动与冲击》
EI
CSCD
北大核心
2015年第18期51-56,共6页
Journal of Vibration and Shock
基金
国家自然科学基金项目(51078139)
教育部新世纪优秀人才计划项目(NCET-11-0123)
关键词
梁柱节点
有限元
动力性能
延性
应变率效应
beam-column connection
finite element simulation
dynamic behavior
ductility
strain rate effect