期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

聚乳酸注塑发泡技术研究进展

Research Progress of Foam Injection Molding of PLA
原文传递
导出
摘要 综述了近年来国内外聚乳酸(PLA)注塑发泡成型技术的研究进展。 In this paper, researches and investigations on foam injection molding of polylactic acid （PLA） home and abroad in recent years were reviewed.
作者 李金伟 何继敏 李珊珊 颜克福 邵翠映
机构地区 北京化工大学塑料机械及塑料工程研究所
出处 《塑料科技》 CAS 北大核心 2015年第10期116-121,共6页 Plastics Science and Technology
关键词 聚乳酸 注塑发泡 微孔发泡 化学发泡 PLA Foam injection molding Microcellular foaming Chemical foaming
分类号 TQ328 [化学工程—合成树脂塑料工业]
  • 相关文献

参考文献32

  • 1任杰,李建波.聚乳酸[M].北京:化学工业出版社,2014:232-291.
  • 2Nofar M,Park C B.Poly(lactic acid)foaming[J].Progress in Polymer Science,2014,39(10):1 721-1 741.
  • 3方荃,何荣军.高分子材料的微孔发泡方法[J].胶体与聚合物,2003,21(4):40-42. 被引量：4
  • 4李珊珊,何继敏,颜克福.聚乳酸发泡成型方法研究现状[J].塑料科技,2014,42(7):123-127. 被引量：4
  • 5Lee JWS,Park CB,Kim SG.Reducing material costs with microcellular/fine-celled foaming[J].Journal of Cellular Plastics,2007,43:297-312.
  • 6Hao-Yang Mi,Max R Salick,Xin Jing,et al.Characterization of thermoplastic polyurethane/polylactic acid(TPU/PLA)tissue engineering scaffolds fabricated by microcellular injection molding[J].Materials Science and Engineering C,2013,33:4 767-4 776.
  • 7Li G,Li H,Turng LS,et al.Measurement of gas solubility and diffusivity in polylactide[J].Fluid Phase Equilib,2006,246:158-166.
  • 8R Pantani,V Volpe,G Titomanlio.Foam injection molding of poly(lactic acid)with environmentally friendly physical blowing agents[J].Journal of Materials Processing Technology,2014,214:3 098-3 107.
  • 9Ameli A,Jahani D,Nofar M,et al.Development of high void fraction polylactide composite foams using injection molding:Mechanical and thermal insulation properties[J].Composites Science and Technology,2014,90:88-95.
  • 10Ameli A,Jahani D,Nofar M,et al.Processing and characterization of solid and foamed injection-molded polylactide with talc[J].Journal of Cellular Plastics,2013,49:351-374.

二级参考文献81

  • 1任杰.聚乳酸的国内外研发、生产现状及应用前景[J].新材料产业,2005(6):25-27. 被引量：25
  • 2周永凯,张建春,张华.大麻纤维的抗菌性及抗菌机制[J].纺织学报,2007,28(6):12-15. 被引量：56
  • 3董凯,范宏,王永常.聚合物纳米复合材料微孔发泡研究进展[J].科技通报,2007,23(4):562-567. 被引量：8
  • 4Bourbigot S, Fontaine G, Bellayer S, et al. Processing and nanodispersion: A quantitative approach for polylactide nanocomposite.[J]. Polymer Testing, 2008, 27(1):2-10.
  • 5Zhang J H, Zhuang w, Zhang Q, et al. Novel polylactide/ vermiculite nanocomposites by in situ intercalative polymerization. I. preparation,characterization, and properties[J]. Polym Compos., 2007, 28(4): 545-550.
  • 6Wu D F, Wu L, Wu L F, et al. Nonisothermal cold crystallization behavior and kinetics of polylactide/clay nanocomposites [J]. Polym Science, Part B: Polym Phys., 2007,45(9): 1 100-1 118.
  • 7Jiang L, Zhang J W, Wolcott M P. Comparison of polylactide/ nano-sized calcium carbonate and polylactide/montmorilionite composites: Reinforcing effects and toughening mechanisms[J]. Polymer, 2007, 48(26): 7 632-7 644.
  • 8Lee Y H, Lee J H, An I G, et al. Electrospun dual-porosity structure and biodegradation morphology of Montmorillonite reinforced PLA nanocomposite scaffolds[J].Biomaterials, 2005, 26(16): 3 166-3 172.
  • 9Wu T M, Wu C H. Biodegradable poly(lactic acid)/chitosanmodified montmorillonite nanocomposites: preparation and characterization [J].Polymer Degradation and Stability, 2006, 91(9): 2 198-2 204.
  • 10Krikorian V, Pochan D J. Poly (I-lactic acid)/layered silicate nanocomposite: fabrication, characterization, and properties[J]. Chem Mater, 2003, 15 (22) : 4 317-4 324.

共引文献33

塑料科技
2015年 第10期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部