期刊文献+

基于ABAQUS/Explicit的AZ31环轧过程的驱动辊直径研究 被引量:2

Drive roller size during radial-axial rolling of AZ31 magnesium alloy based on ABAQUS/Explicit code
下载PDF
导出
摘要 基于ABAQUS/Explicit平台建立AZ31镁合金环件径轴向热轧的三维弹塑性热力耦合有限元模型,分析驱动辊直径对成形环件的应变和温度分布不均匀性以及轧制力能参数的影响规律。结果表明:随着驱动辊直径的增加,成形环件的应变和温度分布越来越不均匀;同时径向轧制力稍有增大,轧制力矩逐渐增加;轴向方向轧制力逐渐减小,轧制力矩逐渐减小。 Based on the ABAQUS/Explicit code, a 3D elastic-plastic and coupled thermo-mechanical FE model of hot radial-axial rolling of AZ31 magnesium alloy was proposed to analyze the influence of drive roller size on the non-uniform distribution of strain and temperature, rolling force and power parameters. The results show that when drive roller size increases, the strain distribution and the temperature distribution of the rolled ring become less homogeneous. In axial direction, the rolling force and rolling torque gradually increase with the increase of drive roller size. In radial direction, the roiling force and rolling torque slight decrease with the increase of drive roller size.
出处 《兵器材料科学与工程》 CAS CSCD 北大核心 2015年第5期16-19,共4页 Ordnance Material Science and Engineering
关键词 驱动辊直径 AZ31镁合金 有限元法 径轴向轧制 drive roller size AZ31 magnesium alloy FEM radial-axial rolling
  • 相关文献

参考文献10

  • 1Song J L, Dowson A L, Jacobs M tt, et al. Coupled thermo-me- chanical finite- element modeling of hot ring rolling process[J]. Journal of Materials Processing Technology, 2002, 121: 332-340.
  • 2Utsunomiya H, Saito Y, Shinoda T, et al. Elastic-plastic finite element analysis of cold ring rolling process [ J ]. Journal of Ma- terials Processing Technology, 2002,125/126: 613-618.
  • 3王敏,杨合,孙志超,郭良刚,欧新哲.Dynamic explicit FE modeling of hot ring rolling process[J].Transactions of Nonferrous Metals Society of China,2006,7(6):1274-1280. 被引量:17
  • 4Sun Zhiehao, Yang He, Ou Xinzhe. Effects of process parame- ters on microstructural evolution during ho.t ring roiling [J]. Computational Materials Science, 2010,49 : 134-142.
  • 5Zhou G, Hua L, Qian D S. 3D coupled thermo-mechanical FE analysis of toll size effects on the radial-axial ring roiling pro- cess [ J ]. Computational Materials Science, 2011,50: 911-924.
  • 6Han Xinghui, Hua Lin, Zhou Guanghua, et al. FE simulation and experimental research on cylindrical ring rolling[J]. Jour- nal of Materials Processing Technology, 2014,214(6) : 1245- 1258.
  • 7Han Xinghui, Hua Lin. Effect of friction on combined radial and axial ring rolling process [J]. Tribology Internationa, 2014, t73 : 117-127.
  • 8Zhou Guang, Hua Lin, Qian Dongsheng, et al. Effects of axial rolls motions on radial-axial rolling process for large-scale al- loy steel ring with 3D coupled thermo-mechanical FEA [ J ]. In- ternational Journal of Mechanical Sciences, 2012,59 : 1-7.
  • 9Han Xinghui, Hua Lin, Zhou Guanghua, et al. A new cylindri- cal ring rolling technology for manufacturing thin-walled cy- lindrical ring [J]. International Journal of Mechanical Scienc- es, 2014,81 : 95-105.
  • 10Zhou G, Hua L, Qian D S. 3D coupled thermo-mechanical FE analysis of roll size effects on the radial-axial ring rolling pro- cess [ J ]. Computational Materials Science, 2011, 50: 911- 924.

二级参考文献10

  • 1.ABAQUS Example Problems Manual([]..2003
  • 2XU Si-guang,,LIAN Jia-chuang.Best position of guide rolls in ring rolling[].Metal Forming Machinery.1991
  • 3.Getting Started with ABAQUS([]..2003
  • 4DAVEY K,,WARD M J.A practical method for finite element ring rolling simulation using the ALE flow formulation[].International Journal of Mechanical Sciences.2002
  • 5XU S G,,WEINMAM K J,YANG D Y,LIAN J C.Simulation of the hot ring rolling process by using a thermo-coupled three-dimensional rigid-viscoplastic finite element method[].Journal of Manufacture Science and Engineering.1997
  • 6LIM T,,PILLINGER I,HARTLEY P.A finite-element simulation of profile ring rolling using a hybrid mesh model[].Journal of Materials.1998
  • 7KIM N,,MACHIDA S,KOBAYASHI S.Ring rolling process simulation by the three dimensional finite element method[].International Journal of Machine Tools and Manufacture.1990
  • 8SONG J L,,DOWSON A L,JACOBS M H,BROOKS J,BEDEN I.Coupled thermo-mechanical finite-element modeling of hot ring rolling process[].Journal of Materials.2002
  • 9JOUN M S,,CHUNG J H,SHIVPURI R.An axisymmetric forging approach to perform design in ring rolling using a rigid-viscoplastic finite element method[].International Journal of Machine Tools&Manufacture.1998
  • 10MAMALIS A G,HAWKYARD J B,JOHNSON W.Spread and flow patterns in ring rolling[].International Journal of Mechanical Sciences.1976

共引文献16

同被引文献11

引证文献2

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部