期刊文献+

环氧丁羟增韧环氧树脂应用研究 被引量:3

Application research of epoxidized hydroxyl-terminated polybutadiene toughened epoxy resin
下载PDF
导出
摘要 采用环氧化端羟基聚丁二烯(EHTPB,简称环氧丁羟)作为环氧树脂固化体系的增韧剂,研究了不同EHTPB质量分数对固化体系力学性能、热性能和电性能的影响。结果表明:随EHTPB质量分数的增加,EHTPB增韧环氧树脂灌封胶的冲击强度呈现先增加后减小的趋势;EHTPB质量分数为10%时增韧环氧树脂灌封胶的冲击强度较佳,增韧性能较好。 The influence of different EHTPB mass fraction on the mechanical,thermal and electrical performance of curing system was investigated by using the epoxidized hydroxyl-terminated polybutadiene(EHTPB) as toughening agent for epoxy resin curing system. The results show that the impact strength of EHTPB toughened epoxy resin potting adhesive exhibits the tendency of first increase and then decrease with the increase of EHTPB mass fraction. The impact strength of toughened epoxy resin potting adhesive and the toughening performance are good under the condition of EHTPB mass fraction of 10%.
出处 《化学推进剂与高分子材料》 CAS 2015年第5期48-51,共4页 Chemical Propellants & Polymeric Materials
关键词 环氧丁羟 增韧环氧树脂 应用 epoxidized hydroxyl-terminated polybutadiene toughened epoxy resin application
  • 相关文献

参考文献4

二级参考文献13

  • 1Bagheri R, Marouf B T, Pearson R A. Rubber- toughened epoxies: a critical review[J]. Polymer Reviews, 2009, 49(3): 201-225.
  • 2Ozturk A, Kaynak C, Tincer T. Effects of liquid rubber modification on the behavior of epoxy resin[J]. European Polymer Journal, 2001, 37(12):2 353-2 363.
  • 3Arias M L, Frontini P M, Williams R J J. Analysis of the damage zone around the crack tip for two rubber-modified epoxy matrices exhibiting different toughen ability[J]. Polymer, 2003, 44(5): 1 537-1 546.
  • 4Chikhi N, Fellahi S, of epoxy resin using rubber[J]. European 38(2): 251-264. Bakar M. Modification reactive liquid (ATBN) Polymer Journal, 2002,.
  • 5Ratna D. Phase separation in liquid rubber modified epoxy mixture. Relationship between curing conditions, morphology and ultimate behavior[J]. Polymer, 2001, 42(9): 4 209-4 218.
  • 6Ratna D, Simon G P. Mechanical characterization and morphology of carboxyl randomized poly (2-ethyl hexyl acrylate) liquid rubber toughened epoxy resins[J]. Polymer, 2001, 42(18): 7 739- 7 747.
  • 7Cheng Xu, Chen Yanxiong. Effect of the structure of curing agents modified by epoxidized oleic esters on the toughness of cured epoxy resins[J].Journal of Applied Polymer Science, 2011, 119(6): 3 504-3 510.
  • 8Kim H R, Myung B Y, Yoon T H, et al. En- hanced fracture toughness of epoxy resins with novel amine-terminated poly(arylene ether sul fone)-carboxylic-terrninated butadiene- acrylonitrile-poly(arylene ether sulfone) tribloek copolymers[J]. Journal of Applied Polymer Science, 2002, 84(8): 1 556-1 565.
  • 9Becu L, Maazouz A, Sautereau H, et al. Fracture behavior of epoxy polymers modified with core- shell rubber particles[J]. Journal of Applied Polymer Science, 1997, 65(12): 2 419-2 43l.
  • 10Cao Youming, Shao Yuefeng, Sun Jun, et al. Mechanical properties of an epoxy resin toughened by polyester[J]. Journal of Applied Polymer Science, 2003, 90(12): 3 384-3 389.

共引文献17

同被引文献14

引证文献3

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部