摘要
FANUC-0i C/D全闭环控制方式可在完成半闭环的设定与调试基础上,通过在CNC上进行分离形检测接口配置和设定完成。讨论了FANUC-0i C/D全闭环建立的硬件连接、相关参数设定的情况,并通过实例加以说明。
FANUC 0 IC/D full closed loop control mode can be finished in half closed loop based on the setting and debugging by separation on CNC shape measuring interface configuration and setting.This article discussed the FANUC 0 IC/D full closed-loop hardware connections and related parameters setting, and explained through an example.
出处
《装备制造技术》
2015年第9期146-147,150,共3页
Equipment Manufacturing Technology
关键词
FANUC-0i
C/D全闭环控制
分离形检测接口配置
全闭环参数
FANUC 0 IC/D full closed-loop control
separation of shape measuring interface configuration
fullyclosed loop parameters
