摘要
在总结以往钢管混凝土柱与钢梁连接节点不足的基础上,提出了新型带外套管式钢管混凝土柱与钢梁单边螺栓连接节点,通过已有的试验研究和理论分析,考虑构件的初始几何缺陷和混凝土的塑性损伤本构,在与试验对比后,分别建立了带和不带外套管式钢管混凝土柱-钢梁端板连接节点的有限元模型.通过对模型进行单调加载,分析节点的破坏和工作机理;然后对节点进行参数分析,总结出影响节点初始刚度和承载力的主要因素;提出外套管式钢管混凝土柱-钢梁端板连接节点的M-θr实用模型.结果表明:带外套管式钢管混凝土-钢梁端板连接节点具有更大的初始刚度、承载力,提出节点的M-θr曲线实用计算方法与有限元计算出的M-θr曲线吻合较好,研究将为外套管式钢管混凝土柱-钢梁单边螺栓端板连接节点在实际工程中的应用提供参考.
The unilateral boh connection nodes of new type concrete filled steel tubular columns with outer shell and steel beam was put forward by summing up the previous deficiency of connection nodes. Based on the experimental and theoretical analysis, in consideration of the initial geometric imperfections of steels and concrete damaged plasticity model, end-plate connections for concrete filled steel tubular columns and steel beam with outer-shell and without outer shell finite element models were established respectively. Under monotonic loading in finite element model, analysis the damage and working mechanism; according to parametric study a- nalysis the main factors of initial stiffness and bearing capacity for joints and establish M-Or practical model for new type joints. The results show that the joints with outer-shell have greater initial stiffness and bearing capacity and better seismic performance. The M-θr models which was presented in this paper are reasonable and reliable. It can provide a reference for theory design and real engineering application.
出处
《郑州大学学报(工学版)》
CAS
北大核心
2015年第5期58-62,共5页
Journal of Zhengzhou University(Engineering Science)
基金
住宅和城乡建设部科技计划项目(2012-k2-8)
广东省教育厅科技创新项目(2012-KJCX-0084)
浙江东南网架股份有限公司横向项目(SM-0716-01)
关键词
外套管
钢管混凝土柱-钢梁连接节点
M-θr实用模型
力学性能
outer-shell
connections of concrete filled steel tubular columns to steel beam
practical moment versuS rotation model
mechaniCal performance