摘要
耦合系数是影响感应耦合式电能传输(ICPT)系统工作效率的关键参数,一般变压器仿真时都采用铜排结构来代替实际线圈绕组以简化模型,忽略了线圈绕制方法对耦合系数的影响。分析讨论了近似仿真结构的垂直绕制法和均匀分布的三角斜绕法两种线圈绕制方法,并在此基础上研究了三角斜绕法中线圈正绕、反绕、线圈翻转等不同绕制方法组合时对系统耦合系数的影响。通过理论分析和仿真不同组合下的变压器耦合系数变化情况,得出在线圈匝数、覆盖面积不变的情况下,线圈初次级采取正绕与反绕相结合的绕制方法能够得到最大的耦合系数。实验结果验证了理论分析的正确性,令线圈结构得到了优化。
Coupling coefficient is the main factor affecting efficiency of inductive coupled power transfer (ICPT) system.Generally,copper sheet is used instead of coil with real structure in simulation of ICPT which ignores the effect of the coil winding method of coupling coefficient.Two types of winding methods are discussed, one is the vertical winding method which is similar to the simulation structure, and another one is tilt winding method which makes coil distribute evenly alone core.Furthermore,relationships between coupling coefficient and the combinations of clockwise winding coils,counterclockwise winding coils and rotated winding coils are researched.Conclusion that the combination of clockwise winding and counterclockwise winding coils can get the maximum coupling coefficient is given out by theoretical analysis and simulations.Experiments result are processed to verify the effectiveness of the optimized coils.
出处
《电力电子技术》
CSCD
北大核心
2015年第10期16-19,共4页
Power Electronics
关键词
电能传输
耦合系数
垂直绕制法
三角斜绕法
power transfer
coupling coefficient
vertical winding method
tilt winding method