新型冷柜内胆内底自动成形装置研制

The Development of New Freezer Liner Insole Automatic Forming Equipment

新型冷柜内胆内底自动成形装置是将取料、输送、冲切、辊轧、折弯等工位步骤集成为一条全自动成形线,整个过程通过智能化程序控制,仅需一个人操作,生产效率高;在冲切工位采用组合模具,减小了独立冲切的累计误差;同时输送过程采用伺服机械手替代传统的皮带输送,减小了位移偏差和定位不准,成功解决了传统工艺非连续式,次品率高,人工操作多,生产效率低下,且存在安全隐患等问题,为冷柜家电行业的快速发展做出了十分重要的贡献。

The new liner in the bottom of the automatic forming device is put reclaimers, conveyor, punching, rolling, bending, and other stations into a fully automated step forming line, the whole process through intelligent process control, only one person to operate, high production efficiency; In the punching station using a combination of die, reduce the accumulated error independent punched. At the same time conveying process using servo robot instead of the traditional conveyor belt, reduces the displacement deviation and positioning allowed, successfully resolved the traditional process of discontinuous, high defective rate, more manual operation, low productivity, and there are security risks and other issues, has made a very important contribution to the rapid development of the freezer appliance industry.