摘要
分析了水下采油树装配预紧力计算方法,计算出了1500m 水深69 MPa（10000psi）工作压力下水下采油树的生产阀块装配预紧力为494645～559360N.开发了基于C 语言的采油树装配预紧力计算软件,通过ANSYS软件对加载计算所得预紧力下的零部件进行强度校核.结果表明：计算所得预紧力符合采油树装配规范要求,验证了所开发计算软件的正确性.
The calculation method of subsea tree assembly pre-tightening force is analyzed,and cal-culating the assembly pre-tightening force of subsea tree production valve block which is 1 500 m water depth and 69 MPa (100 00 psi)working pressure is 494 645~559 360 N.Then it compiled the subsea tree assembly pre-tightening force calculation software based on the C language.Then analyzes the strength of the parts under the pre-tightening force by ANSYS software,the results show that the calculated pre-tightening force can meet the subsea tree assembly requirements,and also proved the calculation software is reliable.
出处
《石油矿场机械》
2015年第10期42-45,共4页
Oil Field Equipment
基金
国家科技重大专项"海洋深水工程重大装备及配套工程技术"子课题"深水水下生产设施制造
测试装备及技术"(2011ZX05027-004-001)
关键词
采油树
预紧力
计算程序
有限元分析
christmas tree
pre-tightening force
calculation procedures
finite element analysis
