Analysis of the Impact of the Cage Type on the Frictional Moment Ball Bearings
Analysis of the Impact of the Cage Type on the Frictional Moment Ball Bearings
摘要
The paper presents the methodology and results of measurement designed to determine the effect of the rolling element separator （cage） at the frictional moment in ball bearings, The measurement was carried out on four groups on bearing with different cages. Measurements were carried out on torque-meter STPM, a device that has been designed and manufactured at Kielce University of Technology. The measurement results showed that the type of cage used in ball bearings has a significant impact on the frictional moment. In addition, the results also confirm that the size of the curvature ratio and the accuracy of the races shape have a significant impact on the frictional moment.
参考文献7
-
1Nozdrzykowski, K., and Janecki, D. 2014. "Comparative Studies of Reference Measurements of Cylindrical SurfaceRoundness Profiles of Large Machine Components." Metrology and Measurement Systems XXI (1): 67-76.
-
2NSK. 2005. Motion & Control. Technical Report.
-
3Krzemiflski-Frede H. Lo~,yska toczne. PWN, Warszawa 1989.
-
4Katalog produkcyjny SKF, 2011.
-
5Gorycki L., Domagalski R., Zmarzty P. Pomiary moment6w oporowych Iozysk tocznych w aspekcie doktadno~ci ksztattowo wymiarowej element6w wsp61pracuj~cych. Mechanik nr. 3, 2015. ISSN 0025-6552.
-
6Janecki, D. Instrukcja obstugi programu do pomiaru statycznego i dynamicznego momentu oporowego w tozyskach "Momentomierz". Politechnika Swi~tokrzyska. Kielce 2014.
-
7Adamczak, S. Domagalski, R. Sender, E. Metody badafi toZysk tocznych w aspekcie wsp6/czesnych wymagafi wyrob6w o wyZszych parametrach eksploatacyjnych. Tribologia, 2011, nr 6, s 11-18.
-
1吴君毅,张若虹,靳文哲.基于DS18B20的温度测量设计[J].科技成果管理与研究,2013(3):40-44.
-
2李良明.带膜盘联轴器的扭矩计在压缩机试验中的使用与校准[J].风机技术,1995,37(3):6-8.
-
3结构体的制造方法及制造装置[J].金属成形工艺,2002,20(6):61-61.
-
4张家全.上海大众 扭矩计量体系简述[J].上海计量测试,1992,19(4):10-10.
-
5徐树林.带式输送机的交流传动电控设备[J].起重运输机械,1990(5):15-21.
-
6韩晶,姜大志,高永坤,孙俊兰.导向叶片角度对柱面笼型粉体分级机流场影响的研究[J].机械设计与制造,2013(9):169-171. 被引量：2
-
7王德民,孙营营,刘蒹.锥柱形件质心、质偏测量装置设计分析[J].机械设计与研究,2016,32(2):69-71. 被引量：4
-
8赵云峰,田建艳.基于MSP430的热量表温度测量设计[J].机械工程与自动化,2008(3):164-165. 被引量：2
-
9刘淼,姜建里,乔国栋.汽车空调压缩机的能耗测量系统的研究[J].测控技术,2016,35(8):40-44. 被引量：11
-
10松浦好喜,徐鸿根.加工大型液晶制造装置用的龙门式加工中心[J].制造技术与机床,2005(2):23-24.
