摘要
为避免传统优化算法在对汽车动力总成悬置系统优化中陷入局部最优解,采用遗传算法对其进行优化。在深入分析设计变量选取、约束函数的提取及目标函数的选取原则基础上,以悬置刚度为优化变量、固有频率的范围和固有频率之差为约束函数、六自由度方向的解耦率为目标函数,利用MATLAB平台的遗传算法进行优化。开发基于遗传算法汽车动力总成悬置系统解耦优化系统,并对某型号汽车动力总成系统优化。优化结果表明:系统的固有频率的分配和解耦率得到极大的改善,效率和精度都得到很大的提升。
To avoid the local optimal solution of the automotive powertrain system by traditional optimization algorithm, the system was optimized by genetic algorithm. The principles of the selection of design variables, the extraction of constraint functions and the selection of the objective functions were deeply analyzed. On this basis, taking the stiffness parameters of the mounting system as the design variables, the scope and the interval of natural frequency as the constraint function, and the decoupling rate of the 6 degrees-of-freedom as the objective function, the powertrain mounting system was optimized by genetic algorithm using MATLAB. The optimization system for powertrain mounting system decoupling of automobiles was developed based on the genetic algorithm. As an example, the powertrain mounting system of a vehicle was optimized. The results show that the distribution of the natural frequency and decoupling rate of the system are greatly improved, and the efficiency and accuracy are greatly raised.
出处
《噪声与振动控制》
CSCD
2015年第5期77-81,共5页
Noise and Vibration Control
基金
国家自然科学基金项目(51265006)
广西科技开发项目(桂科攻1348005-11)
柳州市科技开发项目(2013H020401)
桂林电子科技大学研究生教育创新计划资助项目(GDYCSZ201442)