摘要
氮化硼具有优异的物化性能.可以显著地提高树脂的综合性能,近年来引起了众多科研人员的强烈兴趣。本文首先对氮化硼进行了简述,然后介绍了氮化硼在典型的热塑性树脂和热固性树脂中的应用,其中热塑性树脂包括聚甲基丙基酸甲酯、聚丙烯和聚乙烯等,热固性树脂包括环氧树脂、聚氨酯等,最后对氮化硼树脂基复合材料进行了展望。
出处
《中国粉体工业》
2015年第5期19-24,共6页
China Powder Industry
参考文献31
-
1L. Qin, G. Li, J. Hou, X. Yu, H. Ding, Q. Zhang, N. Wang, X. Qu. Preparation, characterization, and thermal properties of poly (methyl methacrylate)/boron nitride composites by bulk polymerization[J]. Polymer Composites, 2014, 10: 1002--1003.
-
2X. Wang, A. Pakdel, J. Zhang, Q. Weng, T. Zhai, C. Zhi, D. Goiberg, Y. Bando. Large--surface--area BN nanosheets and their utilization in polymeric composites with improved thermal and dielectric properties[J]. Nanoseale Research Letters, 2012, 7: 662--668.
-
3T. Coani, G. S. Barroso, G. Motz, A. Bolzfin, R. A. F. Machado. Preparation of PMMA/hBN composite coatings for metal surface protection[J]. Materials Research, 2013, 16(6): 1366--1372.
-
4B. Xie, X. Huang, G. Zhang. Ultra--flexible polymethyl methacrylate composites induced by sliding of micron--sized hexagonal boron nitride platelets[J]. Sciverse ScienceDirect, 2013, 39: 8543-8548.
-
5Y. Song, C. Yang, D. B. Liu, Y. H. Lin, C. W. Nan. Self--orientation of graphite-nanoplates induces anisotropy of nanoplaies epoxy composites[J]. Ceramics International, 2012, 38: $91--94.
-
6W. Cheewawuttipong, D. Fuoka, S. Tanoue, H, Uematsu, Y. lemoto. Thermal and mechanical properties of pelypropylene/boron nitride composites[J]. Sciverse ScienceDirect, 2013, 34: 808--817.
-
7K. W. Chan, H. M. Wong, K. W. K. Yeung, S. C. Tjong. Polypropylene bioeomposites with boron nitride and nanohydroxyapatite reinforcements[J]. Materials, 2015, 8(3): 992-1008.
-
8陈金,王春锋,王永亮,韩志东.氮化硼在聚乙烯/乙烯-醋酸乙烯共聚物中的选择分布及复合材料的导热性能[J].高分子材料科学与工程,2015,31(2):98-102. 被引量:6
-
9X. Zhang, L. Shen, H. Wu, S. Guo. Enhanced thermally conductivity and mechanical properties of polyethylene (PE)/boron nitride (BN) composites through multistage stretching extrusion[J]. Composites Science and Technology, 2013, 80: 24--28.
-
10高建,袁正凯,虞锦洪,陆绍荣,饶保林,江南.氮化硼纳米片/环氧树脂复合材料的制备与热性能研究[J].绝缘材料,2014,47(2):19-24. 被引量:25
二级参考文献14
-
1张秀菊,李波,林志丹,王勇,吕丽霞,许吉庆,郑少杰.电子封装用复合导热绝缘环氧胶粘剂的研制[J].绝缘材料,2009,42(1):1-4. 被引量:28
-
2Zhou Wenying, Qi Shuhua, Li Haidong, et al. Study on InsulatingThermal Conductive BN/HDPE Composite[J]. ThermochimicaActa,2007,452:36-42.
-
3Mitchell T Huang, Hatsuo Ishida. Investigaton of the BoronNitride/Polybenzoxazine Interphase[J]. Journal of PolymerScience Part B:Polymer Physics,1999,37:2360-2372.
-
4Hatsuo Ishida, Sarawut Rimdusit. Very High Thermal ConductivityObtained by Boron Nitride-filled Polybenzoxazine[J]. Thermochimica Acta,1998,320:177-186.
-
5Zhao Y, Barrera E V. Asymmmetric Diamino Functionalizationof Nanotubes Assisted by BOC Protection and TheirEpoxy Nanocomposites[J]. Advanced Functional Materials,2010,20(18):3039-3044.
-
6Yu J, Huang X, Wang L, et al. Preparation of HyperbranchedAromatic Polyamide Grafted Nanoparticles forThermal Properties Reinforcement of Epoxy Composites[J].Polymer Chemistry,2011,2(6):1380-1388.
-
7Jeong W, Kessler M R. Toughness Enhancement in ROMPFunctionalized Carbon Nanotube/Polydicyclopentadiene Composites[J]. Chemistry of Materials,2008,20(22):7060-7068.
-
8Zhou T, Wang X, Liu X, et al. Influence of Multi-walledCarbon Nanotubes on the Cure Behavior of Epoxy-imidazoleSystem[J]. Carbon,2009,47(4):1112-1118.
-
9蔡忠龙,黄元华,杨光武.超拉伸聚乙烯的弹性模量和导热性能[J].高分子学报,1997,7(3):331-342. 被引量:26
-
10王聪.环氧树脂/氧化铝导热复合材料的结构设计和制备[J].绝缘材料,2010,43(1):52-55. 被引量:27
共引文献29
-
1赵志鸿,吕召胜,谈桂春,栾维涛,张振.2014年我国热固性工程塑料进展[J].工程塑料应用,2015,41(4):124-133. 被引量:2
-
2何子海,虞锦洪,江南,曾岑,潘露云,陆绍荣.功能化氮化硼纳米片/环氧树脂复合材料的制备与热性能研究[J].绝缘材料,2015,48(4):8-13. 被引量:15
-
3何子海,虞锦洪.环氧液晶接枝氧化铝/环氧树脂复合材料的制备与热性能[J].绝缘材料,2015,48(5):15-20. 被引量:7
-
4刘晶如,樊风成,夏阳阳.高密度聚乙烯/乙烯-醋酸乙烯酯共混物的动态流变行为相形态及力学性能[J].高分子材料科学与工程,2016,32(7):62-67. 被引量:1
-
5姜露西,王长松.BN粒子改性聚氨酯/环氧树脂复合材料性能的研究[J].辽宁化工,2016,45(10):1255-1257. 被引量:1
-
6张有茶,贾成厂,贾鹏,贾永昌,张金磊.六方氮化硼填充导热树脂复合材料的研究进展[J].粉末冶金技术,2017,35(1):68-72. 被引量:4
-
7秦玉芳,李茂龙,孙定宇,赵春宝,张彦娜.环氧树脂/改性氮化硅复合材料制备及性能研究[J].化工新型材料,2017,45(6):73-75. 被引量:1
-
8张春翠.物流包装用PP/CSW/hBN复合材料力学及摩擦性能[J].包装工程,2017,38(13):102-107. 被引量:2
-
9毛琳,赵迪,邹雄,王金合,施利毅.多尺度复合热界面材料研究进展[J].绝缘材料,2017,50(8):9-13. 被引量:1
-
10潘桂然,曾小亮,王德,孙蓉.氧化铝微米片/环氧树脂复合材料导热性能的研究[J].绝缘材料,2017,50(8):53-58. 被引量:3
同被引文献8
-
1纪秋龙,章明秋,容敏智,WETZEL B,FRIEDRICH K.纳米碳化硅填充环氧树脂复合材料的摩擦磨损特性[J].复合材料学报,2004,21(6):14-20. 被引量:35
-
2郭红红,单国荣,翁志学.聚醚型聚氨酯增强增韧环氧树脂的研究[J].化学反应工程与工艺,2007,23(3):253-258. 被引量:11
-
3Park S J, Lee E J, Lee J R. A study on thermal and mechanical properties of vapor grown carbon nano~fi~ers-reinforced epoxy meatrix composites[J]. Polym-Korea, 2005, 29(5): 481-485.
-
4Chang Lin, Zhang Zuo, Breidt C, er al. Tribological properties of epoxy nanoeomposites(I): Enhancement of the wear resistance by nano-TiO2 particles[J]. Wear, 2005, 258(2): 141-148.
-
5Yufei Chen, Caiwei Lin, Liping WANG, Zuoyu Wu et al. Characteristic and properties of nano-SiO2-AI2OJEP-PU composite[J]. Electrical Insualation and Dielectric Phenomena, 2013 : 842-845.
-
6邢志国,吕振林,崔永.聚氨酯增韧改性环氧树脂粘接SiC颗粒耐磨涂层的耐冲蚀性能[J].机械工程材料,2010,34(1):84-87. 被引量:10
-
7丁军.无机填料改性端羟基液体丁腈橡胶/环氧树脂复合材料的耐磨性能[J].合成橡胶工业,2014,37(2):84-86. 被引量:8
-
8高建,袁正凯,虞锦洪,陆绍荣,饶保林,江南.氮化硼纳米片/环氧树脂复合材料的制备与热性能研究[J].绝缘材料,2014,47(2):19-24. 被引量:25