期刊文献+

高黏度羟基硅油乳化制备皮革手感剂的研究(续) 被引量:2

Emulsification of high viscosity hydroxyl silicone oil used as leather feeling agent
下载PDF
导出
摘要 以黏度大于2 500MPa·s的羟基硅油为原料,将其乳化制备具有滑感的有机硅皮革手感剂。考察了表面活性剂的类型和用量、乳化温度、HLB值、助乳化剂、p H值、搅拌速度等对制备的羟基硅油乳液性能的影响,通过观察乳液外观、陈放稳定性、离心稳定性、透光率等,确定较佳乳化条件。结果显示:以Span20和Tween40为复合表面活性剂,W乳化剂∶W硅油=30∶100、乳化温度为20℃、HLB=11、p H=8,搅拌速度为800r/min的乳化条件下,可得到透光率为93.6%的半透明、泛蓝光、稳定的羟基硅油乳液,此乳液具有很好的耐酸稳定性和一定的耐碱稳定性。将制备的羟基硅油乳液用于皮革涂饰,可大大降低皮革表面的动摩擦系数和静摩擦系数,使皮革具有光滑的手感。 The hydroxyl silicone oil with viscosity more than 2500MPa. s was emulsified and used as leather feeling agent. The effects of type and amount of surfactants, emulsification temperature, Hydrophile- Lipophile Balance(HLB) value, co- emulsifi- er, pH, stirring rate on the properties of emulsion were investigated. The appearance, storage stability, centrifugal stability and light transmittance of the emulsion were observed and the emulsification conditions were optimized. The results show that, stable hydroxyl silicone oil emulsion with semitransparent blue lignt and 93.6% transmittance can be obtained with Span20 and Tween40 as complex surfactants, Wsurfactants : Wsilicone oil = 30: 100, control emulsification temperature at 20℃, HLB value at 12, pH at 8, stir- ring rate at a constant speed of 800r/min. The hydroxyl silicone oil emulsion has excellent acid resistance and certain alkali resist- ance. When it was used on leather finishing, it can decrease the coefficient of kinetic and static friction of leather surface and give the leather smooth feeling.
出处 《中国皮革》 CAS 北大核心 2015年第17期9-11,16,共4页 China Leather
关键词 皮革手感剂 羟基硅油 乳化 乳液性能 滑感 leather feeling agent hydroxyl silicone oil emulsification emulsion performance smooth feeling
  • 相关文献

参考文献8

二级参考文献22

  • 1尹立群.我国褐煤资源及其利用前景[J].煤炭科学技术,2004,32(8):12-14. 被引量:199
  • 2初茉,李华民.褐煤的加工与利用技术[J].煤炭工程,2005,37(2):47-49. 被引量:76
  • 3张霞,袁素兰,阮洪芬.氨基硅油中氨中和值及中间产物环氧值、含氯量的测定[J].有机硅材料及应用,1995,9(5):23-25. 被引量:33
  • 4安秋风 陈孔常 李临生.有机硅柔软剂的发展与展望.化学通报网络版(Chemistry Online),2000,9.
  • 5Blesa M J, Miranda J L, lizquierdo M T, et al. Curing Time Effect on Mechanical Strength of Smokeless Fuel Briquettes [J]. Fuel Processing Technology, 2003, 80 : 155-167.
  • 6Blcsa M J, Miranda J L, Moliner R, et al. Curing Temperature Effect on Smokeless Fuel Briquettes Prepared with Molasses and H3PO4 [J]. Fuel, 2003, 82: 1669-1673.
  • 7Jun-ichi Ozaki, Yoshiyuki Nishiyama, Peter J Guy, et al. Role of Carboxyl Groups in the Disintegration of Brown Coal Briquettes by Water Sorption [ J ]. Fuel Processing Technology, 1997, 50 : 57 -68.
  • 8Fumio M, Masahisa M. Discoloration- resistant leather substi-tutes and production methods therefor. JP 10266969,1998,8,25.
  • 9Pinteala M, Harabagiu V, Cotzur C, et al. Functional polysiloxanes.Polymer Bulletin, 1994, 32, 173--174.
  • 10Arno K K, Peter L, Christian W.Preparation of carboxy- functional silane and siloxanes by hydrosilylation using unsaturated esters EP739927, 1996,10,30.

共引文献23

同被引文献690

引证文献2

二级引证文献23

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部