期刊文献+

数控电沉积的沉积厚度分布模型研究 被引量:1

Research on deposit thickness model for CNC electronic chemical deposition
下载PDF
导出
摘要 研究和探讨数控电化学沉积的沉积厚度分布。根据法拉第定律和实验研究获得了移动电极在平板上沉积的厚度分布模型,研究结果说明移动电极的电化学沉积厚度分布是不均匀的,呈现凸峰分布,同时沉积厚度除了与沉积系统的特性有关,还受到沉积初始间隙、沉积头移动速度的影响,这种影响关系是一种非线性关系。 The deposit thickness distribution is researched and discussed in this article. Based on Faraday Law and experimental results, the deposit thickness model is derived. The result points out that electronic chemi- cal deposit thickness is not even for moving electrode. The performance of thickness is a camel- back. Conclusion is that deposit thickness is related to initial deposition gap and moving rate of deposit rode, besides performance of deposit system. Those relations are non - linear.
出处 《制造技术与机床》 北大核心 2015年第11期84-86,共3页 Manufacturing Technology & Machine Tool
关键词 电沉积 厚度分布 模型 数控 electronic chemical deposition thickness distribution model CNC
  • 相关文献

参考文献6

  • 1王广春.快速原形技术及其应用[M].北京:化学工业出版社,2006.
  • 2Terry Wohlers. Future potential of prototyping and manufacturing a- round the woad [J]. Rapid Prototyping Journal, 1995,1 ( 1 ) : 4 - 10.
  • 3Kruth J P. Material increase manufacturing by rapid prototyping techniques[J] . Annals of the CIRP, 1999, 40 (2) : 603 - 604.
  • 4Chua Chee Kai, Leong Kah Fai. Rapid prototyping in Singapore: 1988 to 1997[J]. Rapid Prototyping Journal,1999,3(3) :116- 119.
  • 5Cheng W, Fuh J Y H, Nee A Y C, et al. Multi -objective optimization of part - building orientation in stereolithography [J] . Rapid Prototyping Journal, 1995,1 (4) : 12 - 23.
  • 6李湘生,黎建军,梁天长.数控选区电化学沉积快速成型技术研究[J].机械设计与制造,2009(8):163-165. 被引量:1

二级参考文献4

同被引文献12

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部