期刊文献+

基于结构检算方法的梁式桥梁结构快速安全性综合评估系统 被引量:3

A Rapid Comprehensive Safety-Assessment System of Beam Bridge Structure Based on Structure Checking Method
下载PDF
导出
摘要 针对传统桥梁结构承载能力评估存在的不足,建立了梁式桥梁结构安全性的快速综合评估方法。首先,以基于规范理论的桥梁结构检算方法为核心,采用模拟车辆系统替代静载试验,建立现役桥梁结构的承载力和刚度计算系统。其次,使用现场调查、检测手段获取结构承载现状的技术状况信息,确定各计算系统中的技术参数,形成符合桥梁结构实际承载状况的分析检算系统。最后,将分析检算系统和承载力、刚度计算系统相结合,计算得到一系列反映桥梁结构现有承载力和刚度的评估参数,从而实现桥梁结构承载能力的快速评估。通过与实桥荷载试验数据的对比分析表明,采用该方法计算得到的实桥挠度较实测值偏大,偏于保守,并且两者具有相同的趋势,验证了该评估方法的安全性和可靠性。同时,以某现役预应力简支空心板桥为例,实现了该桥的安全性综合评估,结果表明该桥的现有承载力和刚度较设计时折损较少,仍然满足现有承载能力大于设计荷载效应的要求,满足安全运营的需求。 In order to solve the problems of the traditional bridge structure bearing capacity evaluationmethod, a rapid safety-assessment method was established to evaluate the working condition of pre-stressed simple- supporting hollow bridge. Firstly, based on the theory recommended by the nationalbridge codes, a load-simulating system was developed instead of static loading tests, on which the bridgestructure bearing capacity and stiffness calculation system was set up. Secondly, through the field inspec-tion and detection means, some technical information about the current staus of bridge structure bearingcapacity was obtained, which determine the technical parameters of the calculation system and developappropriate analysis system to satisfy the actual bearing capacity of the bridge structure. Finally, combin-ing the bearing capacity and stiffness calculation system and the analysis system, a series of evaluationparameters that reflect actual bearing capacity and stiffness of bridge structure were calculated and ob-tained, which ultimately realized the rapid safety-assessment of bridge structure. Meanwhile, after comparing with the data earned from the field test, the results show that the computed value is slightly higherthan the test value, which takes out a certain degree of conservativeness. Both groups of figures share asimilar trend, verifying the reasonability and the accuracy of the supporting theory. The method was thenapplied to an in-service pre-stressed simple-supporting hollow bridge, and obtained the report that theexisting bearing capacity and stiffness of the bridge are less than those of the design. The calculation ex-ample successfully proves the bridge can fully meet the requirements of continuing operation.
出处 《交通运输研究》 2015年第5期82-88,共7页 Transport Research
基金 江苏省宿迁市交通科学研究项目(SQJTKY2012-09)
关键词 检算方法 评估参数 安全性综合评估 承载能力 刚度 checking method evaluation parameter comprehensive safety-assessment bearing capacity stiffness
  • 相关文献

参考文献22

  • 1AASHTO. Guide Speeifieatiou for Strength Evaluation of Existing Bridge[S]. Washington D. C.: American Associa- tion of State Highway and Transportation Officials, 1989.
  • 2The Highway Ageney. DMRB Part3.: The Assessment of Highway Bridges and Structurs[S]. London: The/qighwa) Agency, 1993.
  • 3CSA. Supplement Noll(Existing Bridge Evaluation) to CSA Standard CANPC SAS6288: Design of Highway Bridges[S]. Rexdale: Canadian Standards Association, 1990.
  • 4BRITO J D, BRANCO F A. Theft-Christensen P. An Expert System for Concrete Bridge Management[J]. Engineering Structures, 1997, 19(7): 519-526.
  • 5FURUTA H. A Fuzzy Expert System fnr Damage Assess- ment Using Genetic Algorithms and Neural Networks[J]. Civil Engineering, 1996, (11): 37-54.
  • 6王永平,张宝银,张树仁.桥梁使用性能模糊评估专家系统[J].中国公路学报,1996,9(2):62-67. 被引量:78
  • 7陆亚兴,殷建军,姚祖康,徐犇,朱慧君.桥梁缺损状况评价方法[J].中国公路学报,1996,9(3):55-59.
  • 8季征宇,林少培.基于模糊层次分析法的结构破损评估专家系统[J].计算结构力学及其应用,1994,11(3):232-240. 被引量:5
  • 9许肇峰,王强.桥梁评估方法的研究现状与发展[J].四川建筑,2008,28(4):148-149. 被引量:8
  • 10ZHAO Z Y, CHEN C Y. A Fuzzy System for Concrete Bridge Damage Diagnosis[J]. Computers and Structures, 2002(80): 629-641.

二级参考文献63

共引文献305

同被引文献13

引证文献3

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部