期刊文献+

掺杂对甘油激光烧蚀冲量耦合特性的影响 被引量:5

Effects of Dopant on Impulse Coupling of Laser Ablated Glycerin
下载PDF
导出
摘要 为了研究激光推进技术中液体工质的最优掺杂浓度,进行了激光烧蚀掺杂甘油液体工质的冲量耦合特性实验研究。实验中采用10ns脉宽的Nd:YAG激光器烧蚀粘性液体甘油,在甘油中混合了不同浓度的纳米碳粉作为掺杂剂,以提高对激光能量的吸收。运用阴影测量法观测了激光烧蚀羽流的喷射过程,对不同掺杂浓度甘油的烧蚀产物、等离子体膨胀、激波传播、飞溅现象进行了对比分析;运用激光干涉扭摆法测量了烧蚀冲量,并分析了掺杂浓度对冲量耦合系数的影响。实验结果表明,掺碳后甘油的喷射行为、激波速度和冲量都发生了改变,而且掺碳后甘油的冲量耦合系数和比冲有了显著提高。综合分析得到1%浓度碳粉是甘油的最优掺杂浓度,此时冲量耦合系数从无掺杂时的67 m N·s/J提高到1250m N·s/J。 Impulse coupling characteristics of laser ablated doped glycerin was experimentally studied in order to obtain the optimal dopant concentration in liquid propellant of laser propulsion. Nd:YAG laser of 10 ns pulse width and glycerin solution were used in experiment,and carbon nano-particle as dopant in glycerin to improve laser energy absorption was proposed. Shadow imaging technique was used to analyze ejection of ablation.Ablation resultant,plasma expansion,shock wave propagation and splashing behavior were comparatively analyzed with different dopant concentration glycerin. Torsional balance system was used to measure impulse,and influence of dopant concentration on impulse coupling coefficient was studied. Experimental results show that because of carbon nanoparticles dopant, the ejection behavior, shockwave velocity and impulse have been changed. The coupling coefficient and specific impulse enhanced evidently. Comprehensive analysis show that1% was the optimal dopant concentration of carbon nano-particles in glycerin and the impulse coupling coefficient of laser ablated glycerin was improved from 67 m N·s/J to 1250 m N·s/J by doped 1% carbon nano-particles.
出处 《推进技术》 EI CAS CSCD 北大核心 2015年第10期1595-1600,共6页 Journal of Propulsion Technology
基金 装备预研项目(513200603) 国家自然科学基金(11102234) 激光推进及其应用国家重点实验室基础研究项目
关键词 液体工质 掺杂 激光烧蚀 冲量耦合 激光推进 Liquid propellant Dopant Laser ablation Impulse coupling Laser propulsion
  • 相关文献

参考文献21

  • 1Schall W O. Ablation Performance Experiments with Metal Seeded Polymers [C]. New York: Third Interna- tional Symposium on Beam Energy Propulsion, 2005: 423-432.
  • 2Sinko J E, Pakhomov A V. Delrin for Propulsion with CO2 Laser Carbon Doping Effects [C]. New York: Fifth International Symposium on Beam Energy Propulsion, 2008: 254-265.
  • 3Jiao L, Cai J, Ma H, et al. Research on Applications of Rectangular Beam in Micro Laser Propulsion [J]. Ap- plied Surface Science, 2014, 301: 481-487.
  • 4Urech L, Lippert T. Designed Polymers for Laser- Based Micro Thrusters Correlation of Thrust with Materi- al, Plasma and Shoekwave Properties [CI. Bellingham: High- Power Laser Ablation V, Proceeding of SPIE, 2004, 5448: 52-64.
  • 5Horisawa H, Sumida S. Yonamine H, et al. Thrust Generation Through Low Power Laser Metal Interaction for Space Propulsion Applications [J]. Vacuum, 2013, (88): 75-78.
  • 6Ye Ji-Fei, Wu Wen-Tang. Effects of Target Thickness on Propulsion Performance in Laser Micro Confinement Ablation [C]. Shanghai: International Symposium on Photonics and Optoelectronics , 2012.
  • 7Zheng Z Y, Gao H, Gao L, et al. Laser Plasma Propul- sion Generation in Nanosecond Pulse Laser Interaction with Polyimide Film [J]. Applied Physics A, 2014, ( 115): 1439-1443.
  • 8Li Nan-Lei, Jin Xing. Numerical Simulation for Thrust Generation Process of Laser Ablated Polymer [C]. Wu- hart: International Symposium on Photonics and Optoelec- tronics, 2011.
  • 9Tsuruta H, Wang B, Wang Z, et al. Repetitive Pulse Performance of One-Micrometer Laser Ablation Propul- sion onto Aluminum [ J]. Journal of Propulsion and Pow- er, 2014, 30(6): 1485-1489.
  • 10崔村燕,洪延姬,文明,何国强.水烧蚀激光推进性能初步分析[J].推进技术,2010,31(2):240-242. 被引量:3

二级参考文献11

共引文献12

同被引文献29

引证文献5

二级引证文献12

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部