期刊文献+

不同流态区盘卷软管阻力损失研究 被引量:1

Research on Pressure Losses from Hose Coiling of Different Flow Patterns
下载PDF
导出
摘要 针对不同水流流态下的卷盘式喷灌机盘卷软管阻力损失计算问题,构建了软管阻力损失试验装置。在一系列的管道流速条件下,对卷盘式喷灌机(卷盘轴径为1.28m)几种常用内径(27.2、34.0、42.6和53.6mm)的软管进行了盘卷软管阻力损失试验。结果表明:软管管内流速相同时,盘卷软管阻力损失均大于直铺软管的阻力损失;随着管内流速的增加,两者之间的阻力损失差值增大;当雷诺数介于29 630和159 208之间,水流形态属于湍流Ⅰ区和湍流Ⅱ区时,盘卷软管阻力损失与管道内水流流态有关,并得到了软管阻力损失系数和软管阻力损失计算公式,为卷盘式喷灌机进水口压力计算提供参考。 In order to analyze the pressure loss from hose coiling on hard-hose travelers, a pressure loss test platform was built. Hose on hard-hose travelers (reel diameter is 1.28m ) with different inner diameters (27. 2, 34. 0, 42.6 and 53.6 mm) were tested under a series of water {low velocities. The results showed that the pressure loss of coiled hose was greater than that of the straight hose when the water flow velocities of hose were the same; the difference of pressure loss between coiled hose and straight hose increased with the increase of flow velocities in the pipe; when Reynolds numbers were in the range of 29630 to 159208, in which the flow patterns were in the turbulent region Ⅰ and turbulent region Ⅱ , there was a relationship between pressure loss of coiled hose and flow patterns. Simultaneously, the formulas for hose pressure loss coefficient and pressure loss were presented, which would provide a reference for calculating water inlet pressure of hard-hose travelers.
出处 《节水灌溉》 北大核心 2015年第11期5-8,共4页 Water Saving Irrigation
基金 水利部"948"项目(201436) 国家工程技术研究中心再建项目(2011FU125Z27-1)
关键词 流态 盘卷软管 阻力损失 flow pattern coiling hose pressure losses
  • 相关文献

参考文献11

  • 1Oakes PL, Rochester E. Energy utilization of hose towed traveler irrigators [J]. Transactions of the ASAE, 1980,23(5):1 131- 1 134.
  • 2张敏,王和平.卷盘式喷灌机软管阻力损失的试验研究[J].中国农机化,2005(3):58-59. 被引量:5
  • 3Rochester E, Flood Jr C, Hackwell S. Pressure losses from hose coiling on hard-hose travellers [J]. Transactions of the ASAE, 1990,33(3) :834-838.
  • 4White C. Streamline flow through curved pipes [J]. Proceedings of the Royal Society of London Series A, 1929,123 (792) : 645- 663.
  • 5Ito H. Friction factors for turbulent flow in curved pipes [J]. J Basic Eng, 1959,81(2):123-134.
  • 6Srinivasan P S, Nandapurkar S S, Holland F A. Friction factors for coils [J]. Transactions of the Institute of Chemical Engineers, 1970,48:156 -161.
  • 7Mishra P, Gupta S. Momentum transfer in curved pipes. 1. Newtonian fluids [J]. Industrial & Engineering Chemistry Process Design and Development, 1979,18 ( 1 ) : 130- 137.
  • 8倪福生,韩玉红,顾磊,等.管道水力输送水平弯管局部阻力实验研究[C]//北京第十九届世界疏浚大会论文集,2010:363~369.
  • 9Berger S, Talbot L, Yao L. Flow in curved pipes [J]. Annual Review of Fluid Mechanics, 1983,15(1):461 -512.
  • 10Dean W. Fluid motion in a curved channel[J]. Proceedings of the Royal Society of London Series A, 1928, 121 (787) : 402 - 420.

二级参考文献1

  • 1梁保松.概率论与数理统计[M].中国农业出版社,2003..

共引文献4

同被引文献6

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部